BBE DS48 manual Installation, 6.1RACK MOUNTING, 6.2CONNECTORS

® INSTALLATION

Your DS48 was carefully packed at the factory and the packaging was designed to protect the unit from rough handling. Nevertheless, we recom- mend that you carefully examine the packaging and its contents for any signs of physical damage that may have occurred in transit.

6.1RACK MOUNTING

The DS48 fits into one standard 19” rack unit of space. Please allow at least an addition- al 4” depth for the connectors on the back panel. Though this device does not generate significant heat, be sure that there is enough air space around the unit for cooling. To avoid overheating, do not place the DS48 in rack above devices that generate significant heat such as power amplifiers.

6.2CONNECTORS

The DS48 must be installed using standard 3 –pin type XLR jacks. Although the inputs are fully balanced, the automatic servo-functions allow them to operate with unbalanced source/loads. Audio outputs also use XLR jacks.

PIN 1 = Ground

PIN 2 = HOT (+)

PIN 3 = COLD (-)

6