® | CREATING A PROGRAM |
9.2 DELAYS:
Clicking the Delays tab will open the Delays window. There is a text box for each output and a display Units selector. The Units selector gives you a choice of whether the delay is expressed in mil- liseconds, feet or meters. Use the up/down arrows to select the incremen- tal values for each output and click OK when finished.
9.3 LIMITERS:
Set the desired value for each of the four parameters per Output channel. Note that Hold Time and Decay select is in 10 ms increments. If using the computer connected to a unit in real time with pro- gram material, the meters on the com- puter screen will mirror those on the unit’s front panel. This provides remote monitoring of the signal levels.
26
