BBE DS48 Front Panel, Rear Panel, Output Meters, Output Mute Buttons, Power Jack, XLR Outputs

FRONT PANEL

11.Output Meters

These display the levels of the eight output channels. The seven LED lamps per display are in 6 dB steps from –30dbV to –6dBV, then -3dBV, then Limit (0dBV), then Clip (+8 dBV)

12.Output Mute Buttons

Pressing one of these buttons will mute the respective Output channel and the LED will illuminate. All outputs will mute automatically during certain program selection and edit- ing processes, to protect the loudspeakers

REAR PANEL

1.Power Jack

This accepts a standard IEC type AC bayonet plug. Because the unit uses universal switching power supply, no voltage selection is required. The ON/OFF power switch is also located here.

2.RS232 Interface

Connect this to the serial port on a PC using the included cable or other standard DB-9 type cable. With the software installed, the PC can now monitor and program the DS48.

3.XLR Outputs 1-8

These are balanced (Pin 2 Hot) XLR outputs.

4.XLR Inputs A-D

These are balanced (Pin 2 Hot) XLR inputs that accept the signal from the outputs of the mixer.

￿￿ ￿ ￿

3