7)SATA0/SATA1 (Serial ATA Connector, Controlled by SiS964)
Serial ATA can provide up to 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA and install the proper driver in order to work properly.
|
| Pin No. | Definition |
1 |
| 1 | GND |
7 | 2 | TXP | |
| S_ATA |
|
|
| 3 | TXN | |
| (Control by SiS964) |
|
|
| 4 | GND | |
|
| ||
|
| 5 | RXN |
|
| 6 | RXP |
|
| 7 | GND |
8)F_AUDIO (Front Audio Panel Connector)
Please make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To find out if the chassis you are buying support front audio panel connector, please contact your dealer. If you want to use "Front Audio" connector, you must remove the jumpers from pins
10 | 9 | Pin No. | Definition | ||
|
| 1 | MIC |
| |
2 | 1 | 2 | GND |
| |
3 | MIC_BIAS | ||||
|
| ||||
|
| 4 | POWER |
| |
|
| 5 | FrontAudio(R) |
| |
|
| 6 | Rear Audio (R)/ Return R |
| |
|
| 7 | NC |
| |
|
| 8 | No Pin |
| |
|
| 9 | FrontAudio (L) |
| |
|
| 10 | Rear Audio (L)/ Return L |
| |
English
- 21 - | Hardware Installation |
