English
Standard CMOS Features |
|
|
| |||
|
| CMOS Setup |
| |||
|
|
| Standard CMOS Features |
|
| |
| Date (mm:dd:yy) | Thu, July | 29 2004 | Item Help | ||
| Time (hh:mm:ss) | 22:31:24 |
| Menu Level ` | ||
` IDE Channel 0 Master | [None] |
| Change the day, month, | |||
` IDE Channel 0 Slave | [None] |
| year |
| ||
` IDE Channel 1 Master | [None] |
|
|
| ||
` IDE Channel 1 Slave | [None] |
| <Week> | |||
| Drive A |
| [1.44M, 3.5"] | Sun. to Sat. | ||
|
|
|
| |||
| Drive B |
| [None] |
| <Month> | |
| Floppy 3 Mode Support | [Disabled] |
| Jan. to Dec. | ||
| Halt On |
| [All, But Keyboard] | <Day> |
| |
|
|
|
|
| 1 to 31 (or maximum | |
| Base Memory |
| 640K |
| allowed in the month) | |
| Extended Memory | 127M |
|
|
| |
| Total Memory |
| 128M |
| <Year> |
|
|
|
|
|
| 1999 to 2098 | |
KLJI: Move | Enter: Select | F10: Save | ESC: Exit | F1: General Help | ||
| F5: Previous Values | F6: |
| F7: Optimized Defaults | ||
|
|
|
|
|
|
|
| Date |
|
|
|
|
|
| The date format is <week>, <month>, <day>, <year>. |
|
|
| ||
| Week | The weekday, from Sun. to Sat., is determined by the BIOS and displayed | ||||
|
| only. |
|
|
|
|
| Month | The month, from Jan. to Dec. |
|
|
| |
| Day | The date, from 1 to 31 (or the maximum allowed in the month). | ||||
| Year | The year, from 1999 through 2098. |
|
|
Time
The times format in <hour> <minute> <second>. The time is calculated based on the
IDE Channel 0 Master, Slave /IDE Channel 1 Master, Slave
IDE HDD | Press "Enter" to select this option for automatic device detection. | |
IDE Channel 0/Channel 1 Master(Slave) setup You can use one of the three methods below: | ||
Auto | Allows BIOS to automatically detect IDE devices during POST. (Default value) | |
None | Select this if no IDE devices are used and the system will skip the automatic | |
| detection step and allow for faster system start up. | |
Manual | User can manually input the correct settings | |
Access Mode | Use this to set the access mode for the hard drive. The four options are: | |
| CHS/LBA/Large/Auto (Default:Auto) | |
Capacity | Capacity of currently installed hard disk. | |
Hard drive information should be labeled on the outside drive casing. | ||
Enter the appropriate option based on this information. | ||
Cylinder | Number of cylinders | |
Head | Number of heads | |
Precomp | Write precomp | |
Landing Zone | Landing zone | |
Sector | Number of sectors | |
|
| |
- 32 - |