Northern Industrial Tools 2 HP / 4 GALLON AIR COMPRESSOR Know Your Compressor, Getting Started

Page 4

KNOW YOUR COMPRESSOR

Handle

Power

Air Regulator

 

Switch

Air

Filter

Oil

 

Safety

Breather

Air

Value

Pressure

Cap

 

 

Chuck

Gauges

Air

Tanks

Tank

Drain

Valve

Figure 1. Air Compressor

Handle: Convenient, rubber gripped handle allows for easy transport of your air compressor.

Air Regulator: The air regulator controls the air flow pressure. Turn regulator clockwise to increase air pressure, counter-clockwise to decrease air pressure.

Air Chuck: Convenient quick disconnect air chuck allows for fast easy connection to an air hose. Tank Drain Valve: The Tank Drain Valve can be opened to allow moisture and compressed air to be released from the Air Tank.

WARNING! Tank Drain Valve should always be opened slowly to avoid damage to equipment and possible injury.

Air Filter: This heavy duty metal air filter keeps your compressor running cleanly, by filtering out impurities.

Oil Breather Cap: As the compressor motor operates pressurized air must be released from the crank case. The oil breather cap allows built up air to escape, while shielding your air compressor from airborne impurities.

Power Switch: The red tipped power switch turns the air compressor on and off. When switch is pulled up, compressor is turned ON. When switch is pushed down, compressor is turned OFF.

Note: Always make sure that compressor Power

Switch is in the OFF position before performing any maintenance or plugging the compressor into a power supply.

Pressure Gauges: These dual gauges indicate the amount of air pressure built up in the air tank, as well as the air pressure being delivered to the air chuck.

Safety Valve: The Safety Valve device relieves pressure from the Air Tank in the event of excessive pressure build up. The Safety Valve is preset at factory. Do not attempt to make any adjustments to the Safety Valve. Periodically pull the ring on the Safety Valve end to check that it is working properly. Air Tanks: Two powder coated steel tanks, with a 4 gallon capacity, stores the compressed air until it is needed.

GETTING STARTED

Before operating your tool, check the contents of the box to make sure you have everything you will need.

Items included in the box:

Air Compressor

Air Filter

Oil Breather Cap

Bottle of Oil

Owner’s Manual

ASSEMBLY

NOTE: Before performing any assembly or maintenance make sure compressor is turned off and unplugged from the power supply.

Installing the Oil and Oil Breather Cap

Your air compressor is shipped without oil in the crankcase. BEFORE STARTING THE AIR COMPRESSOR YOU MUST ADD OIL TO THE CRANKCASE AS DESCRIBED BELOW:

1. Place compressor on level ground.

2. Remove the Oil Shipping Plug from the Oil Fill hole, located on the top of the crankcase cover at the rear of the air compressor.

3

Image 4
Contents HP / 4 Gallon AIR Compressor Table of Contents Safety Rules Assembly Installing the Oil and Oil Breather CapKnow Your Compressor Getting StartedInstalling the Air Chuck Installing the Air FilterInitial Start-Up Procedure OperationInstallation and Location Connecting to Power SourceAdjusting the Air Pressure General OverviewMaintenance Page Description

2 HP / 4 GALLON AIR COMPRESSOR specifications

The Northern Industrial Tools 2 HP / 4 Gallon Air Compressor is a robust and efficient tool designed for both amateur and professional users. This air compressor combines a compact design with powerful performance, making it an ideal choice for a wide range of applications, from inflating tires to powering pneumatic tools.

One of the standout features of this compressor is its 2 HP motor, which delivers impressive power while maintaining energy efficiency. The motor is designed for durability and longevity, ensuring that it can handle the demands of daily use with ease. In addition, the air compressor operates at a quiet level, producing significantly less noise than many competitive models, making it suitable for indoor use without disturbing the surroundings.

The 4-gallon tank provides a decent capacity for storing compressed air, allowing for longer usage periods before needing to refill. The tank is designed to quickly build pressure, reaching a maximum pressure of 125 PSI which is sufficient for most light to medium-duty tasks. This combination of power and capacity makes it perfect for hobbyists and contractors alike.

Moreover, the Northern Industrial Tools air compressor features a reliable oil-free pump. This technology not only reduces maintenance needs but also enhances the portability of the unit, making it easy to move around job sites or garages. The oil-free operation means users don't have to worry about oil changes or leaks, which adds to the compressor’s convenience.

Another beneficial characteristic of this compressor is its portability. With a compact and lightweight design, it features easy-carry handles, allowing users to transport it easily. The compressor also comes equipped with rubber feet that provide stability during operation and protect floors from scratches.

In terms of safety features, the Northern Industrial Tools air compressor includes a pressure switch that automatically shuts off the motor when the maximum pressure is reached, preventing overexertion. Additionally, it includes a safety valve to release excess pressure, ensuring user safety.

Overall, the Northern Industrial Tools 2 HP / 4 Gallon Air Compressor is a reliable and versatile tool for anyone looking for a quality air compressor that combines power, efficiency, and ease of use. Whether for household tasks or professional applications, it is designed to meet a variety of needs while providing exceptional performance.