Porter-Cable FCP350 instruction manual 906388 10-28-02.qxd 10/28/02 1150 AM

Page 5

906388 - 10-28-02.qxd 10/28/02 11:50 AM Page 5

Fig. 11

Fig. 12

22.Do not overreach. Keep proper footing and balance at all times when using or handling the tool.

23.Fire fasteners into work surface only: never into materials too hard to penetrate. Fig. 15.

24.Grip tool firmly to maintain control while allowing tool to recoil away from work surface as fastener is driven. In “Contact Actuation Mode” if safety element is allowed to recontact work surface before trigger is released an unwanted fastener will be fired.

25.Do not drive fasteners on top of other fasteners, or with the tool at too steep an angle: the fasteners can ricochet causing personal injury. Fig. 15.

26.Do not drive fasteners close to the edge of the workpiece. The workpiece is likely to split allowing the fastener to fly free or ricochet causing personal injury. Fig. 16.

27.FOR CONTACT ACTUATION MODE ONLY, Do not use on scaffoldings or ladders or for tasks in which changing location involves the use of scaffoldings, stairs, ladders, and the like. Do not use for specific tasks such as closing boxes or crates or fitting transportation safety systems on vehicles and wagons. Fig. 17.

Fig. 17

Fig. 13

Fig. 14

Fig. 15

Fig. 16

5

Image 5
Contents High Pressure Portercable Read and Follow ALL Instructions General Safety RulesWear ear protection to safe-guard 906388 10-28-02.qxd 10/28/02 1150 AM Power Source Technical SpecificationsEMPLOYER’S Responsibilities Functional DescriptionPreparing the Tool ← ←Operating Instructions Using the Tool with Selectable Triggering OptionsRotate the knob counterclockwise to decrease Clearing a Jammed Fastener Troubleshooting MaintenanceClean and Inspect Daily Service and RepairsPORTER-CABLE Limited ONE Year Warranty AccessoriesCanadian PORTER-CABLE Delta Service Centers