21.Remove finger from trigger when not driving fasteners. Never carry tool with finger on trigger. In “Contact Actuation Mode” tool will fire a fastener if safety is bumped while trigger is depressed. Fig. 14.
22.Do not overreach. Keep proper footing and balance at all times when using or handling the tool.
23.Fire fasteners into work surface only: never into materials too hard to penetrate. Fig. 15.
24.Grip tool firmly to maintain control while allowing tool to recoil away from work surface as fastener is driven. In “Contact Actuation Mode” if safety element is allowed to recontact work surface before trigger is released an unwanted fastener will be fired.
25.Do not drive fasteners on top of other fasteners, or with the tool at too steep an angle: the fasteners can ricochet causing personal injury. Fig. 15.
26.Do not drive fasteners close to the edge of the workpiece. The workpiece is likely to split allowing the fastener to fly free or ricochet causing personal injury. Fig. 16.
27.FOR TOOLS SET FOR CONTACT ACTUATION MODE, Do not use on scaffoldings or ladders or for tasks in which changing location involves the use of scaffoldings, stairs, ladders, and the like. Do not use for specific tasks such as closing boxes or crates or fitting transportation safety systems on vehicles and wagons. Fig. 17.
Fig. 14
Fig. 15
Fig. 16
Fig. 17
TECHNICAL SPECIFICATIONS
Noise level | . . . . . . . | Typical Mean |
A - Weighted sound impulse . . . | effective Acceleration . . . . 4.2 m/s2 | |
power level | 105 dBA |
|
P - Emission sound pressure |
| |
pressure level | . 98 dBA |
|
6