Anytime any maintenance or repairs are done, first:
1.Disconnect the Stapler from the air hose.
2.Empty Magazine (59, 69) completely.
3.Attempt to fire the Stapler into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any Fasteners.
4.Always leave Magazine Cover (72) closed during maintenance. The Magazine Cover is
Maintenance
1.Periodically lubricate all moving parts and pivots with a light oil.
2.Wipe down the Floor Stapler with a damp cloth. Do not use harsh detergents or solvents.
3.Check that the Base Plate (52) and the Hammer Face (1) is clear of any dirt or debris.
Troubleshooting
Note: Have the following problems repaired by a qualified service technician.
PROBLEM |
| CAUSE |
| SOLUTION |
|
|
|
| |
Air leaking in nose | 1. Loose Nose Screws | 1. | Tighten and recheck | |
| 2. | Bumper is cracked/worn | 2. | Replace Bumper |
|
|
|
|
|
Lack of Power, slow to cycle. | 1. | Tool is too dry | 1. | Lubricate |
| 2. | Air Pressure is too low | 2. | Check air supply equipment |
| 3. | Exhaust blocked | 3. | Clean exhaust channel |
|
|
|
| |
Intermittent feeding or no fastener | 1. Damaged pusher spring | 1. | Replace Spring | |
coming out | 2. Wrong size Fastener | 2. | Use correct size | |
| 3. | Dirty magazine or wearplate | 3. | Clean magazine and nose |
|
|
|
| |
Jammed Fastener | 1. Driver channel worn | 1. | Replace wear plate | |
| 2. | Driver is broken/worn | 2. | Replace driver |
| 3. | Bent Fasteners | 3. | Use straight Fasteners |
|
|
|
|
|
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 94446 | For technical questions, please call | Page |