Introduction Assembly, Inventory | Grizzly G8586 instruction

	MODEL G8586
	PORTABLE CLAMPING
	WORKBENCH
	INSTRUCTIONS
Introduction	Assembly

This workbench features four adjustable clamping dogs for securing flat work, independently adjust- able hand screws for irregular clamping, and fold- ing capability for convenient storage.

1..Attach the crossbars to the leg braces with (8) M6-1 x 40 Phillips head screws, hex nuts and (16) 6mm flat washers, as show in Figure 2.

Specifications
Weight .......................................................18 lbs.
Dimensions ...................... 311/4"H x 24"W x 25"D			x 4	x 4	Leg
Clamping Capacity.........................................4 1⁄4"

Work Surface....................................... 24" x 9 1⁄2"
Inventory		Qty
A.. Front Table Top.......................................... 1
B... Rear Table Top........................................... 1
C... Table Brackets............................................ 2					Crossbar
D..	Crossbars.................................................... 2
			Figure 2. Crossbars and legs assembled.
E..	Leg Frames................................................. 2
F.. Clamping Dogs........................................... 4			2. Press the release button on a table bracket
G...	Rubber Feet................................................ 4
H... Hardware Bag (not shown)			(Figure 3), swing it open, then place the
	—Tap Screws 5 x 14mm....................... 16		bracket on the bottom of the front table top.
	—Phillip Head Screws M6-1 x 40........... 8		Position the handle on the side of the table
	—Hex Nuts M6-1.................................... 8		top with the measuring scale.
	—Flat Washers 6mm............................ 16
	—Hex Bolts M8-1.25 x 45....................... 4		Table Bracket
	—Lock Nuts M8-1.25.............................. 4
	—Flat Washers 8mm.............................. 8				x 4

Release

Button

Handle

Figure 3. Table bracket installed on bottom of

front table top.

3. Secure the table bracket to the front table top

Figure 1. Model G8586 inventory.

with (4) tap screws, as shown in Figure 3.

Warning: No portion of this manual may be reproduced in any shape

Or form without the written approval of Grizzly Industrial, inc..

#bL10763

printed in CHINA

WORKBENCH

INSTRUCTIONS

Introduction

Assembly

Specifications

Inventory

Qty

Figure 2. Crossbars and legs assembled.

(Figure 3), swing it open, then place the

Figure 3. Table bracket installed on bottom of

3. Secure the table bracket to the front table top

Figure 1. Model G8586 inventory.

with (4) tap screws, as shown in Figure 3.