Grizzly specifications Operation, G8586 Parts Breakdown

4..Install the other table bracket on the opposite end of the table top in a similar manner.

5. Repeat Steps 2-4to secure the table brack- ets to the bottom of the rear table top.

6..Place the table assembly onto the leg braces, align the mounting holes, then secure with (4) M8-1.25 x 45 hex bolts, hex nuts, and (8) flat washers, as shown in Figure 4.

Clamping

Dog

x 2 x 2

Foot

Figure 4. Legs fastened to table assembly.

7..Install the rubber feet on the legs (Figure 4) so the longest side of each foot is at the cor- ner.

8..Install the clamping dogs (Figure 4) in the holes on the table tops, as required, to hold your workpiece.

Operation

Turn the hand cranks to adjust the table tops for clamping workpieces between the tables or between the clamping dogs using the V-shaped recesses.

DO NOT use the Model G8586 as a step- ladder.. Doing so could cause serious personal injury..

NOTICE

Never exceed the listed capacity of the workbench; doing this could break it..

G8586 Parts Breakdown

	&(
&	&+
	(
("&	("(
("' &%	'

&&&&&'

,

	)
&,	-
&-	*
	+

REF	PART #	DESCRIPTION
1	P8586001	TABLE TOP (REAR)
2	PHTEK20M	TAP SCREW M5 X 14
3	P8586003	TABLE BRACKET
3-1	P8586003-1	THREADED ROD
3-2	P8586003-2	THREADED SOCKET
3-3	P8586003-3	TABLE BRACKET HANDLE
4	PS81M	PHLP HD SCR M6-1 X 40
5	PW03M	FLAT WASHER 6MM
6	PN01M	HEX NUT M6-1
7	P8586007	CROSSBAR (FRONT)
8	P8586008	LEG FRAME (R)
9	P8586009	RUBBER FOOT
10	PB15M	HEX BOLT M8-1.25 X 40
11	PW01M	FLAT WASHER 8MM
12	PLN04M	LOCK NUT M8-1.25
13	P8586013	CLAMPING DOG
16	P8586016	TABLE TOP (FRONT)
17	P8586017	CROSSBAR (REAR)
18	P8586018	LEG FRAME (L)

.

-2- G8586 Portable Clamping Workbench