SECTION 4: OPERATIONS
Operation Safety | Basic Controls | |
|
|
|
|
|
|
Damage to your eyes, lungs, and ears could result from using this machine without proper protective gear. Always wear safety glasses, a respirator, and hearing protection when operating this machine.
Loose hair and clothing 
can get caught in machin- ery and cause serious per- sonal injury. Keep loose clothing and long hair
away from machinery.
Keep the blade guard in the down position at all times. Failure to do this could result in serious personal injury or death.
NOTICE
If you have never used this type of machine or equipment before, WE STRONGLY REC- OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training.
H8145 Baby Table Saw
ON/OFF Switch: Starts and stops the motor. The switch is equipped with a disabling key that can be removed to prevent unauthorized people from using the machine.
Fence Lock Knobs: Lock/unlock each end of the fence when setting the fence for workpiece cut- ting width.
Blade Tilt Lock Handles: Lock/unlock the tilt angle of the blade for bevel or straight cutting. A tilt degree scale is located at the front of the machine to indicate the current blade position.
Fence Lock
Knob
ON/OFF |
| Blade Tilt |
Switch |
| Lock Handle |
|
|
|