Assembly
1.Install appropriate blade (not included) using the box wrench and end wrench provided (Figure 2). The blade arbor retaining bolt has a reverse thread.
Figure 2. Attach the cutting blade.
2.Attach the water valve to the saw using the machine screw provided. The plug should be attached in such a manner that the watering posts sit on either side of the blade, and the valve sits near the back of the handle (Figure 3).
Figure 3. Attach the water plug.
3.Attach the vinyl hose to the water valve (Figure 4).
Figure 4. Attach the vinyl hose.
4.When connecting the tile saw to a threaded faucet or hose, use the sup- plied rubber connector. When using a water tank, the tank should be located at least 311⁄2" higher than the work area (Figure 5).
311⁄2"
Figure 5. Using a water tank.
Serious personal injury could occur if you do not disconnect the saw from power while installing the blade or the watering attachment. Always unplug the saw while performing either of these actions.
Model G8993 4" Tile Saw |