OPERATING TIPS AND MAINTENANCE
Operating Guides and Tips
Avoid overloading the jig saw. Do not apply excessive pressure to the tool while using. If the speed drops abnormally, decrease pressure immediately.
Ensure the safety of the workplace.
Clear the work area of all parts and debris that may cause injury by flying objects. Securely fix the object to be worked on in a vise or otherwise clamp to avoid injury. Do not attempt to hold workpiece by hand.
Inspect the tool before use. Run the tool free of the workpiece before using to ensure all parts are running smooth- ly and there are no abnormal sounds or sparks. If any defect is found, have unit serviced.
Know your work site. Take care to make sure the material being worked on is not supporting another structure, or that there are no obstructions. Before cutting into walls, check for wires, other electrical hazards, gas lines or plumbing which may be hid- den in the wall space.
Maintenance
Your cordless power tool will give you hun- dreds of hours of operation time before ever needing service. The electrical com- ponents of this cordless saw are not user serviceable. Repair should always be undertaken by a qualified electrical repair technician.
Keep the saw free from dirt and grease. Always store it in a dry place, preferably in the case that is supplied.
The battery will require periodic recharg- ing, and eventually replacement after it has exceeded its recharge life (approximately
Disassembly and improper reassembly of this device can result in electrical shock danger. Always have this device serviced by a qualified electrical repair technician. Serious injury will result.
H0601 14.4V Cordless Jig Saw |