Before YOU Start

The battery in your new cordless power tool will not be fully charged when you receive it. Follow the instructions below to charge your battery.

Battery charging with the standard charger :

1.Plug the power cord for the charger into the 110/120V outlet.

2.Insert the battery into the charger. The battery fits into the oval recess in only one way. Do not force the bat- tery. Insert until it locks into place.

3.The red LED light on the charging unit will come on when the battery begins its charging cycle.

4.Charge battery for 3-5 hours for a full charge from a fully depleted condi- tion. The red LED will not go off until the battery is removed from the charger base.

Control Location

Refer to Figure 1 for the location of the key components and controls of the machine. These controls are called out later in the manual for their specific use when operat- ing the saw. Become familiar with the con- trols and all of the adjustments and set- tings before operating the Jig Saw.

Specifications

Speed: 2900 SPM

Motor Type: Universal Brush Motor

Motor Power: 14.4V

Blade Orbit: 4 Settings

Stroke Length: 1"

Blade: Universal Style Mounting, 3" - 5"

Blade Guide: Grooved Roller Bearing

Footplate: Adjustable from +45˚ to -45˚

Trigger Saftey Button

On/Off Trigger

Blade

Plunger

13⁄8" Dust Port

Orbit Selector

Blade Locking

ScrewFootplate

Fig 1. Location of controls.

H0601 14.4V Cordless Jig Saw

-5-