Grizzly G7211, G7212 instruction manual LubricationMiscellaneous

LubricationMiscellaneous

Shielded and pre-lubricated ball bearings require no lubrication for the life of the bearings. All bear- ings are standard sizes and replacements can be purchased from our parts department or bearing supply store.

As for other items on this machine, such as adjustment controls, an occasional ÒshotÓ of light oil is just about all that is necessary. Before apply- ing, however, wipe off any sawdust with a clean cloth, towel or dry paint brush and spray on the lubricant. Ensure that oil does not get on the pul- leys or V-belts because it could cause belt deteri- oration and slipping.

Always be aware of the condition of your bandsaw before using it. Routinely check the condition of the following items and repair or replace as nec- essary.

1.Loose mounting bolts.

2.Worn switch.

3.Worn or damaged blade.

4.Worn or damaged support bearings or guide bearings.

G7211/7212 24" Bandsaw -21-