Grizzly G0537 Beginning Assembly, Mount Scroll Saw, Attach Blade Guard, To attach the blade guard

Page 14

Beginning Assembly

This section covers the basic assembly and adjust- ment instructions needed to begin operation. Complete the assembly in the order provided in this manual and then read the remaining portion of the manual before attempting any type of operation.

Your safety is important! Please follow the warnings below during this entire section:

Sharp edges on metal parts may cause person- al injury. Examine the edges of all metal parts before handling.

!Disconnect power to the machine during the

entire assembly process. Failure to do this may result in seri- ous personal injury.

Mount Scroll Saw

To attach the scroll saw to a solid surface:

1.Locate a rectangular piece of 3⁄4" plywood that is at least 21"W and at least 20"D.

2.Remove the rubber feet from the scroll saw.

3.Mount the base of the scroll saw to the cen- ter of the plywood with 1⁄4" x 2" lag bolts and 1⁄4" washers.

4.Clamp the plywood securely to a workbench.

5.To permanently mount the scroll saw to the workbench, screw 1⁄4" x 2" (or longer) lag bolts with 1⁄4" washers directly to the work- bench.

Attach Blade Guard

To attach the blade guard:

1.Thread the bolt through the blade guard components as shown in Figure 6, and screw it into the knurled nut.

Figure 6. Blade guard assembly.

2.Slide the supporting rod through the upper arm and into the hold down block, and tight- en the set screw.

3.Attach the guard assembly to the supporting rod and tighten the knurled nut.

4.Adjust the blade guard so that it rides just above the workpiece, and tighten the lock knob shown in Figure 7.

Lock Knob

Figure 7. Blade guard adjustment.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G0537 Scroll Saw

-12-

 

 

 

 

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Scroll SAW Page Table Of Contents Safety Safety Instructions For Power ToolsDrugs or ALCOHOL. Full mental alert Always USE Safety GLASSES. AlsoUSE Proper Extension CORD. Make Do not OVER-REACH. Keep properAdditional Safety Instructions For Scroll Saws Never USE Your Scroll SAW with the Blade Guard RemovedIntroduction CommentaryCircuit Requirements VoltOperation GroundingExtension Cords Machine Features General machine features G0537 Scroll SawControls G0537 Inventory SET UPUnpacking Site Considerations Clean UpWeight Load Working ClearanceAttach Blade Guard Beginning AssemblyMount Scroll Saw To attach the scroll saw to a solid surfaceTo test run the scroll saw Installing BladesTest Run General To adjust the blade speedOperations Blade SpeedChanging Blades Upper ArmTo make a curved cut Straight Cuts Curved CutsTo make a straight cut To make a bevel cut Inside CutsBevel Cuts Working Table MaintenanceMaintenance Safety Personal injuryLubrication Replacing BrushesSquaring Table Service AdjustmentsAbout Service To do this may resultAftermarket Accessories Reference InfoG0537 Scroll Saw Description Machine Data Sheet Troubleshooting Guide Symptom Possible Cause Corrective ActionWarranty & Returns Warranty Card Grizzly INDUSTRIAL, INC BOX BELLINGHAM, WACall Today For a Free Full Color Catalog

G0537 specifications

The Grizzly G0537 is a powerful and versatile industrial table saw designed for serious woodworkers who demand precision and reliability in their woodworking projects. This robust saw boasts a range of features and technologies that cater to both professional craftsmen and hobbyists looking to elevate their woodworking experience.

One of the standout features of the Grizzly G0537 is its heavy-duty cast iron table, which measures a generous 27 x 40 inches. The large working surface provides ample space for cutting sheets of plywood and other materials while ensuring stability and accuracy during operations. The table is precision ground for a smooth surface, minimizing friction and enhancing the overall cutting experience.

Powered by a reliable 5 HP, 220V three-phase motor, the Grizzly G0537 delivers consistent power and speed, allowing users to tackle even the most challenging hardwoods with ease. The motor is equipped with a magnetic switch that enhances safety by providing a quick shutdown in case of an emergency. This feature is crucial for maintaining a secure working environment.

Another significant characteristic of the G0537 is its 50-inch rip capacity, enabling users to make wide crosscuts and rip cuts with significant efficiency. The saw features a precision tilt mechanism that allows the blade to be tilted from 0 to 45 degrees, which is essential for performing bevel cuts. The adjustable blade height also ensures that users can achieve the desired cutting depth with ease.

The G0537 is equipped with a built-in dust collection system, which helps maintain a clean working environment by efficiently capturing sawdust and debris. This technology not only enhances safety but also promotes better visibility while working.

Additionally, the Grizzly G0537 incorporates a quick-adjust rip fence, known as the "T-square" fence system, which ensures accurate and repeatable cuts. This easy-to-use fence system can be locked securely in place, boosting confidence in every cut made.

Overall, the Grizzly G0537 is a feature-rich table saw that combines safety, precision, and user-friendly technologies. Its sturdy design and exceptional capabilities make it an ideal choice for both professional and avid woodworkers seeking high performance and durability in their woodworking tools. Whether for intricate projects or large-scale production, the G0537 stands out as a reliable solution that meets various woodworking needs.
Top Page Image Contents