Grizzly G0537 instruction manual Changing Blades, Upper Arm

Page 17

Changing Blades

A typical scroll saw blade will wear out in 1⁄2 to 2 hours, depending on the material cut. Blades become dull quicker when cutting thick material, plywood, laminates, hardwoods and metal.

To change the blade:

1.Disconnect the machine from the power source.

2.Loosen the blade tension adjustment knob.

3.Remove the throat plate and move the blade guards up.

4.Push down on the upper arm shown in Figure 10, pull the upper end of blade out of the holder, push down on the blade to free the lower end of the blade, and pull the blade up to remove.

Figure 10. Upper Arm.

5.Feed the new blade through the table and hook it into the lower blade holder as shown in Figure 11. The teeth should face forward and down.

Figure 11. Blade attached to both holders.

6.Push down on the upper blade holder and slide the upper end of the blade into the hold- er. Make sure that the pins are seated into the grooves in both holders.

7.Increase the tension on the blade until the blade gives a musical sound when plucked.

Note—Determining correct blade tension is subjective and is learned through experi- ence. If the blade is not tensioned enough the blade will drift off the layout line when cutting. The scroll saw will also have exces- sive noise and vibration. If the blade is too tight the blade could break, causing serious injury. Blades that are tensioned correctly will last longer and are less likely to break.

8.Replace the throat plate and lower the blade guards into position.

G0537 Scroll Saw

-15-

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Scroll SAW Page Table Of Contents Safety Instructions For Power Tools SafetyUSE Proper Extension CORD. Make Always USE Safety GLASSES. AlsoDrugs or ALCOHOL. Full mental alert Do not OVER-REACH. Keep properNever USE Your Scroll SAW with the Blade Guard Removed Additional Safety Instructions For Scroll SawsCommentary IntroductionVolt Circuit RequirementsOperation GroundingExtension Cords General machine features G0537 Scroll Saw Machine FeaturesControls G0537 Inventory SET UPUnpacking Weight Load Clean UpSite Considerations Working ClearanceMount Scroll Saw Beginning AssemblyAttach Blade Guard To attach the scroll saw to a solid surfaceTo test run the scroll saw Installing BladesTest Run Operations To adjust the blade speedGeneral Blade SpeedUpper Arm Changing BladesTo make a curved cut Straight Cuts Curved CutsTo make a straight cut To make a bevel cut Inside CutsBevel Cuts Maintenance Safety MaintenanceWorking Table Personal injuryReplacing Brushes LubricationAbout Service Service AdjustmentsSquaring Table To do this may resultReference Info Aftermarket AccessoriesG0537 Scroll Saw Description Machine Data Sheet Symptom Possible Cause Corrective Action Troubleshooting GuideWarranty & Returns Warranty Card BOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCCall Today For a Free Full Color Catalog

G0537 specifications

The Grizzly G0537 is a powerful and versatile industrial table saw designed for serious woodworkers who demand precision and reliability in their woodworking projects. This robust saw boasts a range of features and technologies that cater to both professional craftsmen and hobbyists looking to elevate their woodworking experience.

One of the standout features of the Grizzly G0537 is its heavy-duty cast iron table, which measures a generous 27 x 40 inches. The large working surface provides ample space for cutting sheets of plywood and other materials while ensuring stability and accuracy during operations. The table is precision ground for a smooth surface, minimizing friction and enhancing the overall cutting experience.

Powered by a reliable 5 HP, 220V three-phase motor, the Grizzly G0537 delivers consistent power and speed, allowing users to tackle even the most challenging hardwoods with ease. The motor is equipped with a magnetic switch that enhances safety by providing a quick shutdown in case of an emergency. This feature is crucial for maintaining a secure working environment.

Another significant characteristic of the G0537 is its 50-inch rip capacity, enabling users to make wide crosscuts and rip cuts with significant efficiency. The saw features a precision tilt mechanism that allows the blade to be tilted from 0 to 45 degrees, which is essential for performing bevel cuts. The adjustable blade height also ensures that users can achieve the desired cutting depth with ease.

The G0537 is equipped with a built-in dust collection system, which helps maintain a clean working environment by efficiently capturing sawdust and debris. This technology not only enhances safety but also promotes better visibility while working.

Additionally, the Grizzly G0537 incorporates a quick-adjust rip fence, known as the "T-square" fence system, which ensures accurate and repeatable cuts. This easy-to-use fence system can be locked securely in place, boosting confidence in every cut made.

Overall, the Grizzly G0537 is a feature-rich table saw that combines safety, precision, and user-friendly technologies. Its sturdy design and exceptional capabilities make it an ideal choice for both professional and avid woodworkers seeking high performance and durability in their woodworking tools. Whether for intricate projects or large-scale production, the G0537 stands out as a reliable solution that meets various woodworking needs.
Top Page Image Contents