Dust Port |
| Guide Post |
|
|
|
|
|
|
To install the dust port:
1.Place the dust port on the saw as shown in
Figure 8.
2.Secure it with the included Phillips head screws.
Figure 8. Dust port installed.
The rack and pinion guide post can be easily raised and lowered.
To adjust the guide post:
1.Loosen the guide post lock knob indicated by the arrow in Figure 9.
2.Turn the guide post handwheel.
3.Tighten the lock knob.
Because the blade guard and the entire upper blade guide assembly are attached to the guide post, these items move up or down with the guide post.
Figure 9. Guide post lock knob.
18" & 20" Super |