Grizzly Tank Pressure Regulator, Pressure Regulator H4519 3 HP Air Compressor

Page 12

Tank Pressure

Regulator

The pressure regulator has been factory set for the highest quality operating perfor- mance.

The pressure regulator adjusts the desired PSI range where the air compressor kicks in and out to keep the tank pressurized for the best operating performance.

NOTICE

The Model H4519 3 HP Air Compressors have been factory set to kick off at the proper PSI range. Only attempt to adjust the pressure regulator if your air compressor does not reach or pressurizes beyond the proper PSI level.

To adjust the pressure regulator:

1.Unplug the air compressor from the power supply.

2.Make sure the compressor switch is in the OFF position.

3.Drain the pressure from the tank.

4.Remove the black ON/OFF switch cover by removing the screw which is in the recess on the top of the cover. Pull the black cover up and set it aside.

5.Turn the pressure adjustment bolt (Figure 8) a half turn clockwise to increase the tank pressure and a half turn counter-clockwise to decrease the pressure.

6.Connect the compressor to the power supply and start the compressor.

7. If the PSI level still needs adjustment repeat steps 1 through 6.

8.Replace the cover when the proper adjustments have been made.

Figure 8. Pressure Regulator.

-10-

H4519 3 HP Air Compressor

Page 11 Page 13
Image 12
Page 11 Page 13
Contents HP AIR Compressor Model H4519Page Safety Safety Instructions For Pneumatic ToolsBefore Operating This Equipment Not avoided, will result in death or serious injuryWear Approved Hearing Protection Additional Safety For Air Compressors Read this Entire Manual Before Operating the CompressorIntroduction and SET UP CommentaryUnpacking Site Placement Circuit Requirements 220V Operation GroundingExtension Cords Preparing for USE Duty CycleStarting To start the air compressorAIR Control Delivered Pressure Air ReleaseTo control the air delivery to your tool Tank Pressure Regulator Pressure Regulator H4519 3 HP Air CompressorConnecting Tools To connect air tools to your air com- pressorMaintenance Before Each UseChanging V-belt To change the V-belt drive on your air compressorAfter First Hours Of Use WeeklyWhen storing your air compressor fol- low these guidelines Every 300 Hours StorageTroubleshooting Problem Cause ActionFaulty Model H4519 3 HP Air Compressor Crank Case Front Cover Gasket Exhaust Pipe Warranty and Returns Warranty Card BOX BELLINGHAM, WA

H4519 specifications

The Grizzly H4519 is a sophisticated woodworking tool designed for both amateur woodworkers and seasoned professionals. As a heavy-duty band saw, it combines precision engineering with robust construction, enabling users to tackle a variety of cutting tasks with ease. Its impressive features make it an essential addition to any workshop.

At the heart of the H4519 is its powerful 2 HP motor, which delivers consistent performance and allows the saw to cut through thicker materials without bogging down. This motor is paired with a reliable belt drive system, ensuring smooth operation and minimal vibration for a cleaner cut. The saw is equipped with a 14-inch throat depth and a 12-inch resaw capacity, enabling it to handle a wide range of materials including hardwoods, softwoods, and even some composite materials.

One of the notable features of the Grizzly H4519 is its precision blade guide system. This system utilizes micro-adjustable bearings that ensure the blade remains stable during operation. With a variety of blade sizes available, users can select the optimal blade for their specific cutting needs, whether they are making intricate curves or straight cuts. The blade's quick-release lever allows for easy changes, getting users back to work in no time.

The H4519 also includes a robust cast iron table that measures 15-3/4 inches by 18 inches, providing ample workspace for larger projects. The table features a tilt function, enabling bevel cuts and enhancing versatility. Additionally, a built-in dust port helps maintain a clean work environment, connecting easily to a dust collection system.

Safety is a top priority with the Grizzly H4519. It features a safety switch and an emergency stop button, ensuring that the saw can be quickly shut down in the event of an incident. The saw also comes with a blade protection guard which minimizes the risk of injury while maximizing visibility.

Lastly, the Grizzly H4519 is designed for durability. Its heavy cast iron frame reduces shaking and enhances stability during operation, ensuring long-lasting performance. This tool is a perfect investment for anyone looking to enhance their woodworking capabilities, promising precision, power, and reliability in every cut. Whether building furniture or crafting intricate designs, the Grizzly H4519 stands ready to deliver exceptional results.
Top Page Image Contents