Grizzly H4519 Every 300 Hours Storage, When storing your air compressor fol- low these guidelines

Page 17

Every 300 Hours

 

Storage

 

 

 

After every 300 hours or 3 months of regular operation, perform the following maintenance items:

•Change the compressor motor oil. Use compressor oil or a non-deter- gent 30 weight oil.

•Rinse the air filter foam element in water.

•Check for air leaks and correct as needed.

•Clean the cylinder head fins for prop- er cooling.

•Check for loose bolts or fittings.

Like all power tools, there is danger associated with operating this equipment. Accidents are frequently caused by lack of familiarity or fail- ure to pay attention. Use this machine with respect and caution to lessen the possibility of operator injury. If normal safety precautions are overlooked or ignored, serious personal injury many occur.

When storing your air compressor fol- low these guidelines:

1.Set the ON/OFF button to OFF.

2.Turn the regulator counter-clockwise to set the delivery pressure to zero.

3.Disconnect air tools or accessories.

4.Pull the safety drain valve ring to bleed excess pressure from tank. The pressure gauge for the tank should read 15-20 PSI.

5.Drain water from the tank by opening the drain valve on the bottom of the tank.

6.Close the drain valve when all the water has been released.

7.Store the air compressor in its normal operating position in a cool protected area.

NOTICE

Water will condense in the air com- pressor tank. Water left in the tank can cause the tank to weaken and corrode, increasing the risk of tank rupture.

H4519 3 HP Air Compressor

-15-

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Model H4519 HP AIR CompressorPage Safety Instructions For Pneumatic Tools SafetyBefore Operating This Equipment Not avoided, will result in death or serious injuryWear Approved Hearing Protection Read this Entire Manual Before Operating the Compressor Additional Safety For Air CompressorsCommentary Introduction and SET UPUnpacking Site Placement Extension Cords Circuit Requirements220V Operation Grounding Duty Cycle Preparing for USETo start the air compressor StartingTo control the air delivery to your tool AIR ControlDelivered Pressure Air Release Pressure Regulator H4519 3 HP Air Compressor Tank Pressure RegulatorTo connect air tools to your air com- pressor Connecting ToolsBefore Each Use MaintenanceTo change the V-belt drive on your air compressor Changing V-beltWeekly After First Hours Of UseEvery 300 Hours Storage When storing your air compressor fol- low these guidelinesProblem Cause Action TroubleshootingFaulty Model H4519 3 HP Air Compressor Crank Case Front Cover Gasket Exhaust Pipe Warranty and Returns Warranty Card BOX BELLINGHAM, WA

H4519 specifications

The Grizzly H4519 is a sophisticated woodworking tool designed for both amateur woodworkers and seasoned professionals. As a heavy-duty band saw, it combines precision engineering with robust construction, enabling users to tackle a variety of cutting tasks with ease. Its impressive features make it an essential addition to any workshop.

At the heart of the H4519 is its powerful 2 HP motor, which delivers consistent performance and allows the saw to cut through thicker materials without bogging down. This motor is paired with a reliable belt drive system, ensuring smooth operation and minimal vibration for a cleaner cut. The saw is equipped with a 14-inch throat depth and a 12-inch resaw capacity, enabling it to handle a wide range of materials including hardwoods, softwoods, and even some composite materials.

One of the notable features of the Grizzly H4519 is its precision blade guide system. This system utilizes micro-adjustable bearings that ensure the blade remains stable during operation. With a variety of blade sizes available, users can select the optimal blade for their specific cutting needs, whether they are making intricate curves or straight cuts. The blade's quick-release lever allows for easy changes, getting users back to work in no time.

The H4519 also includes a robust cast iron table that measures 15-3/4 inches by 18 inches, providing ample workspace for larger projects. The table features a tilt function, enabling bevel cuts and enhancing versatility. Additionally, a built-in dust port helps maintain a clean work environment, connecting easily to a dust collection system.

Safety is a top priority with the Grizzly H4519. It features a safety switch and an emergency stop button, ensuring that the saw can be quickly shut down in the event of an incident. The saw also comes with a blade protection guard which minimizes the risk of injury while maximizing visibility.

Lastly, the Grizzly H4519 is designed for durability. Its heavy cast iron frame reduces shaking and enhances stability during operation, ensuring long-lasting performance. This tool is a perfect investment for anyone looking to enhance their woodworking capabilities, promising precision, power, and reliability in every cut. Whether building furniture or crafting intricate designs, the Grizzly H4519 stands ready to deliver exceptional results.
Top Page Image Contents