Grizzly H3370/H3371 Connecting Tools, To connect air tools to your air com- pressor

Page 13

CONNECTING TOOLS

To connect air tools to your air com- pressor:

1.Make sure the compressor model you use has a sufficient cubic feet per minute (CFM) output for the air tool you plan to connect. (Most air tools will have an air requirement stated in terms of a specific CFM at a specific pressure.)

2.The compressor should put out a higher CFM than the tool requires.

If you are connecting multiple tools that will be used simultaneously, then the CFM for each tool should be added together and compared to the compressor output value.

3.Connect the tool, using a good quality air line with an adequate length to reach from the compressor to the point of use.

Note—Quick-connect couplers, shown in Figure 10, are a good option for fast and sure connection of tools and air hoses.

Figure 10. Quick connect couplers

These couplers are included with the air compressor. Make certain the air hose will not be placed in a position where it can become constricted or cut by a sharp object. NoteÑRunning over a hose with heavy vehicles may not cause an immedi- ate leak, but it will shorten the life of the hose.

Model H3370/H3371Air Compressors

Consideration should also be given to the type of usage. A nailer or staple gun uses air in short bursts and it is easier for the compressor to maintain pressure. A paint sprayer or grinder tends to use a more continuous stream of air as these tools are run for longer time periods. It is always better to oversize a compressor to allow for variation in the type of usage and the number of tools to be powered. Air tools being operated with insufficient air volume will not perform their function satisfactorily.

Always disconnect air hose from tools whenever not in use or while servicing! During maintenance, a tool connected to air may operate accidentally, causing serious per- sonal injury!

The Model H3370/H3371 Air

Compressors are specifically designed for air tool operation. DO NOT MODIFY OR USE THIS MACHINE FOR ANY OTHER PUR- POSE. Modifications or improper use of this tool will void the warran- ty. If you are confused about any aspect of this machine, DO NOT use it until you have answered all your questions. Serious personal injury may occur.

-11-

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model H3370/H3371 Pancake and HOT DOG AIR CompressorsPage Safety Instructions For Pneumatic Tools SafetyBefore Operating This Equipment Wear Approved Hearing Protection Read this Entire Manual Before Operating the Compressor Additional Safety For Air CompressorsCommentary Introduction and SET UPUnpacking Site Placement 110V Operation Grounding Circuit RequirementsExtension Cords Duty Cycle Preparing for USEStarting Delivered Pressure Air Release AIR ControlPressure Regulator Model H3370/H3371Air Compressors Tank Pressure RegulatorTo connect air tools to your air com- pressor Connecting ToolsEach Use MaintenanceHours of Use After FirstEvery 300 Hours Storage When storing your air compressor, fol- low these guidelinesProblem Cause Action TroubleshootingEarly, test pressure relief and repair or Model H3370 Pancake Air Compressor Model Stator 115V/60HZ Model H3371 Hot Dog Air Compressor Valve Patch Stator 115V/ 60HZ Model H3370/H3371Air Compressors Warranty and Returns Warranty Card Place Stamp Here

H3370/H3371 specifications

The Grizzly H3370 and H3371 are robust machines designed for precision and efficiency, catering primarily to woodworkers and craftsmen who demand quality in their tools. These models are celebrated for their exceptional performance and user-friendly features that enhance the overall woodworking experience.

One of the standout characteristics of the Grizzly H3370 and H3371 is their solid construction, which ensures stability during operation. Built with durable materials, these machines are designed to withstand the rigors of continuous use, making them ideal for both hobbyists and professionals alike. The heavy-duty cast iron frames provide a strong foundation, reducing vibrations and ensuring accurate cuts.

The main features of the Grizzly H3370 include a powerful motor that generates sufficient horsepower, enabling users to tackle even the toughest materials with ease. This enhanced power facilitates smoother cuts and increases productivity, making the machine suitable for various woodworking applications. The H3371 offers similar power but may include additional functionalities that cater to specific tasks, such as more advanced blade options or added precision features.

Both models are equipped with adjustable settings, allowing users to customize their cutting depths and angles. This versatility is crucial for achieving the desired results, whether it’s for intricate joinery or simple panel cuts. The ease of adjustment ensures that both novice and experienced woodworkers can operate the machines with confidence.

In terms of safety, Grizzly places a high priority on user protection. Both the H3370 and H3371 come with safety features such as blade guards and emergency shut-off switches. These systems are designed to minimize accidents, ensuring that users can focus on their work without compromising their safety.

Moreover, the H3370 and H3371 incorporate advanced technologies that enhance cutting efficiency. The precision-engineered components contribute to a smoother operation, reducing the likelihood of kickback or binding during use. This technology not only improves functionality but also extends the lifespan of the machine by minimizing wear and tear.

In conclusion, the Grizzly H3370 and H3371 are exceptional woodworking machines that combine power, durability, and safety. With a range of features and technologies tailored for performance, these models are perfect for anyone looking to elevate their woodworking projects. Whether you're crafting furniture, cabinetry, or intricate designs, Grizzly’s tools will help you achieve professional results with every cut.
Top Page Image Contents