Grizzly H3370/H3371 instruction manual Safety, Before Operating This Equipment

Page 3

SAFETY

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progres- sion of symbols is described below. Remember that safety messages by them- selves do not eliminate danger and are not a substitute for proper accident pre- vention measures.

Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

 

 

 

 

Indicates a potentially hazardous situation which, if

 

 

 

 

 

 

 

 

not avoided, COULD result in death or serious injury.

 

 

 

 

Indicates a potentially hazardous situation which, if

 

 

 

 

 

 

 

 

 

 

 

 

 

 

not avoided, MAY result in minor or moderate injury.

 

 

 

 

It may also be used to alert against unsafe practices.

 

 

 

 

 

 

 

 

 

NOTICE

 

This symbol is used to alert the user to useful infor-

 

 

mation about proper operation of the equipment.

Safety Instructions For Pneumatic Tools

1.KEEP ALL SAFETY DEVICES IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form a habit of checking to see that keys and adjusting wrenches are removed from tool before operation.

3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

4.DO NOT USE IN DANGEROUS ENVIRONMENT. DO NOT use pneumatic tools in damp or wet locations, or where any flammable or noxious fumes may exist. Keep work area well lighted.

5.KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept at a safe distance from work area.

6.MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing air hoses from tools.

7.DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE THE RIGHT TOOL. DO NOT force tool or attachment to do a job for which it was not designed.

9.DO NOT USE UNDER THE INFLU- ENCE OF DRUGS OR ALCOHOL.

Model H3370/H3371 Air Compressors

-1-

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model H3370/H3371 Pancake and HOT DOG AIR CompressorsPage Safety Safety Instructions For Pneumatic ToolsBefore Operating This Equipment Wear Approved Hearing Protection Read this Entire Manual Before Operating the Compressor Additional Safety For Air CompressorsCommentary Introduction and SET UPUnpacking Site Placement Circuit Requirements 110V Operation GroundingExtension Cords Duty Cycle Preparing for USEStarting Delivered Pressure Air Release AIR ControlPressure Regulator Model H3370/H3371Air Compressors Tank Pressure RegulatorTo connect air tools to your air com- pressor Connecting ToolsEach Use MaintenanceHours of Use After FirstEvery 300 Hours Storage When storing your air compressor, fol- low these guidelinesProblem Cause Action TroubleshootingEarly, test pressure relief and repair or Model H3370 Pancake Air Compressor Model Stator 115V/60HZ Model H3371 Hot Dog Air Compressor Valve Patch Stator 115V/ 60HZ Model H3370/H3371Air Compressors Warranty and Returns Warranty Card Place Stamp Here

H3370/H3371 specifications

The Grizzly H3370 and H3371 are robust machines designed for precision and efficiency, catering primarily to woodworkers and craftsmen who demand quality in their tools. These models are celebrated for their exceptional performance and user-friendly features that enhance the overall woodworking experience.

One of the standout characteristics of the Grizzly H3370 and H3371 is their solid construction, which ensures stability during operation. Built with durable materials, these machines are designed to withstand the rigors of continuous use, making them ideal for both hobbyists and professionals alike. The heavy-duty cast iron frames provide a strong foundation, reducing vibrations and ensuring accurate cuts.

The main features of the Grizzly H3370 include a powerful motor that generates sufficient horsepower, enabling users to tackle even the toughest materials with ease. This enhanced power facilitates smoother cuts and increases productivity, making the machine suitable for various woodworking applications. The H3371 offers similar power but may include additional functionalities that cater to specific tasks, such as more advanced blade options or added precision features.

Both models are equipped with adjustable settings, allowing users to customize their cutting depths and angles. This versatility is crucial for achieving the desired results, whether it’s for intricate joinery or simple panel cuts. The ease of adjustment ensures that both novice and experienced woodworkers can operate the machines with confidence.

In terms of safety, Grizzly places a high priority on user protection. Both the H3370 and H3371 come with safety features such as blade guards and emergency shut-off switches. These systems are designed to minimize accidents, ensuring that users can focus on their work without compromising their safety.

Moreover, the H3370 and H3371 incorporate advanced technologies that enhance cutting efficiency. The precision-engineered components contribute to a smoother operation, reducing the likelihood of kickback or binding during use. This technology not only improves functionality but also extends the lifespan of the machine by minimizing wear and tear.

In conclusion, the Grizzly H3370 and H3371 are exceptional woodworking machines that combine power, durability, and safety. With a range of features and technologies tailored for performance, these models are perfect for anyone looking to elevate their woodworking projects. Whether you're crafting furniture, cabinetry, or intricate designs, Grizzly’s tools will help you achieve professional results with every cut.
Top Page Image Contents