Parkside manual Introduction, Belt sander PBS 900 A1, Features and equipment, Proper use

Page 5

Introduction

The following pictograms are used in these operating instructions / on the device:

 

Read instruction manual!

W

Watts (Effective power)

 

Observe caution and safety notes!

 

Safety class II

 

Caution – electric shock!

 

Wear hearing protection, dust

 

 

protection mask, protective glasses

 

Danger to life!

 

 

 

and protective gloves.

 

 

 

 

Explosive material!

 

Keep children away from electrical

 

 

power tools!

 

 

 

n0

 

 

Risk of loss of life by electric shock

Rated idle running speed

 

from damaged mains lead or mains

 

 

plug!

V~

Voltage

 

Dispose packaging and appliance in

 

an environmentally-friendly way!

 

 

Belt sander PBS 900 A1

Features and equipment

1 Belt speed adjuster wheel

Introduction

Please make sure you familiarise your- self fully with the way the device works

before you use it for the first time and that you understand how to handle electrical pow- er tools correctly. To help you do this please read the accompanying operating instructions.

Keep these instructions in a safe place. If you pass the device on to anyone else, please ensure that you also pass on all the documentation.

2Locking knob

3ON / OFF switch

4 Toothed belt cover

5 Dust extraction spout

6 Belt adjuster screw

7 Auxiliary handle

8 Ventilation slots

9 Tensioning lever

10Dust collection box

11Extraction adapter

Fixed mounting kit:

12Mounting frame

Proper use

The belt sander is designed for dry sanding of large surfaces of wood, plastic, metal, plaster and painted surfaces. The device may only be used for dry sanding. Always use a sanding belt and grade of grit suitable for the particular surface you are sanding. The speed selected should also be appro- priate for the material. The device is not intended for commercial use. Any other use or modification to the device shall be considered as improper use and could give rise to considerable dangers. The manufacturer will not accept liability for loss or damage arising from improper use.

13Clamp plates 2 x

14Screw clamps 2 x

15Spacer plates 2 x

16Screw

Included items

Check that all the items and accessories are present immediately after unpacking the device:

1 Belt sander PBS 900 A1

1 Sanding belt

6GB/IE

Image 5
Contents Belt Sander PBS 900 A1 GB / IE Page Table of contents Introduction Features and equipmentBelt sander PBS 900 A1 Proper useTechnical information Workplace safetyElectrical safety Personal safety General safety advice for electrical power toolsCareful handling and use of electrical power tools Do not use the mains lead forWear safety glasses and a dust protection mask Safety advice for belt sandersPreparing for use Advice on useTensioning / changing the sanding belt Vacuum dust extractionSelecting the correct rotational speed and sanding belt Switching on and offPreparing for use / Operation Tips and tricks Using the sander in a fixed mountingOperation Warranty Service centreDisposal Do not dispose of electric tools in the household wasteDeclaration of conformity / Manufacturer Einleitung InhaltsverzeichnisAllgemeine Sicherheitshinweise für Elektrowerkzeuge InbetriebnahmeBandschleifer PBS 900 A1 Einleitung EinleitungAusstattung Bestimmungsgemäßer GebrauchArbeitsplatz-Sicherheit LieferumfangTechnische Daten Elektrische Sicherheit Allgemeine Sicherheitshinweise für ElektrowerkzeugeSicherheit von Personen Zweckentfremden Sie das Kabel nicht, um das ElektroSicherheitshinweise für Bandschleifer Verwendung und Behandlung des ElektrowerkzeugsArbeitshinweise Schleifband einspannen / wechselnStaubabsaugung Inbetriebnahme/ BedienungEin- und ausschalten Drehzahl und Schleifband wählenStationäres Arbeiten BedienungService Bedienung / Wartung und Reinigung / Service / GarantieTipps und Tricks Wartung und ReinigungEntsorgung Entsorgung / Konformitätserklärung / HerstellerKonformitätserklärung Hersteller Werfen Sie Elektrowerkzeuge nicht in den HausmüllKompernass Gmbh