Electrical safety, Personal safety | Parkside PEBS 900 SE specification

General safety advice for electrical power tools

2. Electrical safety

To avoid danger to life from electric shock:

a)The mains plug on the device must match the mains socket. The plug must not be modified in any way. Do not use an adapter plug with devices fitted with a protective earth. Unmodified plugs and matching sockets reduce the risk of electric shock.

b)Avoid touching earthed surfaces such as pipes, radiators, ovens and refrig- erators with any part of your body.

There is an increased risk of electric shock if your body is earthed.

c)Keep the device away from rain or moisture. Water entering an electrical device increases the risk of electric shock.

d)Do not use the mains lead for

any purpose for which it was not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Damaged or tangled mains leads increase the risk of electric shock.

e)When working outdoors with an electrical power tool always use ex- tension cables that are also approved for use outdoors. The use of an extension cable suitable for outdoor use reduces the risk of electric shock.

f)Use a residual current device (RCD) for protection if operating the electri- cal power tool in a moist environment is unavoidable. The use of an RCD reduces the risk of electric shock.

3.Personal safety

a)remain alert at all times, watch what you are doing and always proceed with caution. Do not use the device if you are tired or under the influence of

8 GB/IE/CY

drugs, alcohol or medication. One mo- ment of carelessness when using the device can lead to serious injury.

b)Wear personal protective

equipment and always wear safety glasses. The wearing of

personal protective equipment such as dust masks, non-slip safety shoes, safety helmets or ear protectors, appropriate to the type of elec- trical power tool used and work undertaken, reduces the risk of injury.

c)Avoid unintentional operation of the device. Check that the electrical power tool is switched off before you connect it to the mains, pick it up or carry it. Accidents can happen if you carry the device with your finger on the ON / OFF switch or with the device switched on.

d)Remove any setting tools or spanners before you switch the device on. A tool or spanner left attached to a rotating part of a device can lead to injury.

e)Avoid placing your body in an unnat- ural position. Keep proper footing and balance at all times. By doing this you will be in a better position to control the device in unforeseen circumstances.

f)Wear suitable clothing. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves clear of mov- ing parts. Loose clothing, jewellery or long hair can become trapped in moving parts.

g)If vacuum dust extraction and collection devices are fitted do not forget to check that they are properly connected and correctly used. The use of these devices re- duces the hazard presented by dust.

4.Careful handling and use of electrical power tools

a)Do not overload the device. Always use an electrical power tool that is intended for the task you are under- taking. By using the right electrical power tool for the job you will work more safely and achieve a better result.

PEBS 900 SE specifications

The Parkside PEBS 900 SE is a powerful and versatile band saw that has become a favored tool among both DIY enthusiasts and professional craftsmen. Designed for precision and efficiency, this saw is ideal for a wide range of cutting tasks, whether in woodwork, metal fabrication, or other materials.

One of the standout features of the Parkside PEBS 900 SE is its robust 900-watt motor, which provides ample power for cutting through thick and dense materials with ease. This ensures that users can tackle heavier projects without worrying about the saw bogging down or stalling. The machine is capable of providing a variable speed range, allowing users to adjust the blade speed according to the material being cut. This adaptability enhances the saw's efficiency and helps achieve cleaner cuts.

The cutting capacity of the PEBS 900 SE is impressive, with a maximum cutting height of up to 80mm. This allows for a variety of potential applications, from intricate designs to larger pieces. The saw features a tilting table, which can be adjusted from 0 to 45 degrees, making it suitable for cutting angled or beveled edges.

Safety is a priority with the Parkside PEBS 900 SE, as it includes several key safety features. For instance, the robust protective enclosure prevents accidental contact with the blade while cutting. Additionally, the integrated laser guide provides precise alignment, ensuring that every cut is accurate, reducing the likelihood of mistakes or mishaps.

The machine is designed for user comfort, with an ergonomic handle that minimizes strain during prolonged use. The compact and lightweight design makes it easily transportable, allowing users to move it from job site to job site or store it conveniently when not in use.

Enhanced by a dust extraction port, the PEBS 900 SE also helps maintain a clean work environment by allowing for efficient removal of sawdust and debris during operation. This feature not only improves visibility but also contributes to a healthier workspace.

In summary, the Parkside PEBS 900 SE is a well-rounded band saw that combines power, precision, convenience, and safety. Its advanced features, including a variable speed motor, tilting table, and integrated laser guide, make it a dependable choice for any cutting project, whether at home or in a professional workshop. With this tool in hand, users can expect results that meet their craftsmanship needs.