Harbor Freight Tools 66995 Save this Manual, Safety Alert Symbol and Signal Words

Page 2

SAVE THIS MANUAL

Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Safety Alert Symbol and Signal

Words

In this manual, on the labeling, and all other information provid- ed with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

DANGER indicates a hazardous

situation which, if not avoided, will result in death or serious injury.

WARNING indicates a

hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION, used with the safety

alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE is used to address practices not related to personal injury.

CAUTION, without the safety alert

symbol, is used to address practices not related to personal injury.

Symbol Definitions

Symbol

Property or statement

PSI

Pounds per square inch of pressure

 

 

CFM

Cubic Feet per Minute flow

 

 

SCFM

Cubic Feet per Minute flow at

standard conditions

NPT

National pipe thread, tapered

 

 

NPS

National pipe thread, straight

 

 

 

WARNING marking concerning Risk

 

of Eye Injury. Wear ANSI-approved

 

safety goggles with side shields.

 

Warning marking concerning Risk of

 

Puncture Injury. Wear heavy-duty

 

work gloves.

 

Read the manual before set-up and/

 

or use.

 

 

 

WARNING marking concerning Risk

 

of Hearing Loss. Wear hearing

 

protection.

 

WARNING marking concerning Risk

 

of Respiratory Injury. Wear NIOSH-

 

approved dust mask/respirator.

 

WARNING marking concerning Risk

 

of Explosion.

 

 

SKU 66995

For technical questions, please call 1-800-444-3353.

Page 2

Image 2
Contents For technical questions or replacement parts, please call Gauge Brad NailerSymbol Property or statement Safety Alert Symbol and Signal WordsSymbol Definitions Save this ManualWork area Personal safetyGeneral Service Tool use and careNever connect to an air Must wear ANSI-approved safetyWhen not driving fasteners to Source that is capableVibration Precautions Functional Description Initial Tool SET UP AssemblySpecifications Components and ControlsTo Prevent Explosion UnpackingAir Supply Recommended Air Line ComponentsOperating Instructions Work Piece and Work Area Set UpSingle Sequential Safety Trip Mechanism Definition To Prevent Serious Injury From Accidental Operation Single Sequential Safety Trip Mechanism Testing ProcedureLoading/Unloading Nailer Tool must not cycle fire. If itDo not exceed the tool’s maximum air pressure rating USER-MAINTENANCE InstructionsGeneral Operating Instructions To Prevent Serious InjuryCleaning, Maintenance, Lubrication Clearing JamsTroubleshooting Problem Possible Causes Likely SolutionsRecord Product’s Serial Number Here Parts ListPart Description ’ty Assembly Diagram Please Read the Following CarefullyMission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800