Gardena Art 7944 operating instructions For Your Safety

Page 4

A For Your Safety

Operating the pump

The pump should be operated via a residual current device

 

with a residual current rating of 30 mA (DIN VDE 0100 -702

 

and 0100 -738). The pump must be placed on solid, even

 

ground. Please ask your electrician for his advice.

Mains power cables

Mains power cables should not have a smaller cross-section

 

than a rubber sheathed cable of the designation H05 RNF.

 

Extension cables must meet the requirements of DIN VDE 0620.

For Austria

In Austria power cables should correspond to ÖVE-EM 42,

 

T 2 (2000)/1979 § 22 according to § 2022.1. According to this

 

standard pumps used in swimming pools and ponds should

 

only be operated via an isolating transformer. Please contact

 

your electrician.

For Switzerland

In Switzerland mobile appliances which are used outdoors,

 

must be connected via a residual-current device.

Visual check

Before operating the pump, look to see if there is any damage

 

of the pump (esp. regarding power cable and plug). A damaged

 

pump must not be used. In case of damage, please have the

 

pump checked by our GARDENA Service Centre or by an

 

authorised electrician.

GB

17

Image 4
Contents Gardena Bar Applications Range of Your Pump Intended purposeFor Your Safety Page Assembly Page Operation Positioning the pumpPay attention to Minimum water depth Starting the pumpCleaning the folding filter Care InstructionsCapacity control Avoid dry operationWhere to store StorageInformation Blocked feed impellerTechnical Data Product liabilityEU Certificate of Conformity Guarantee Disposal109 110 111 USA