Operation
Positioning the pump | .The |
| freely. (Minimum water depth: 40 cm) |
| .The pump should be submerged as far as |
| possible into the water (about 10 to 15 cm |
| above the bottom of the pond). |
| ➔ If necessary shorten the hose to do this! |
| .The pump must always be below the ice sheet. |
| .The hose should be straightened out. |
| .Run the power cable so that is protected against damage |
| caused by frost and snow. |
Pay attention to | Make sure that the water depth is at least about 40 cm deep! |
minimum water depth |
|
Starting the pump | If you expect frosty conditions connect the power cable to a 230 V |
| AC socket. |
| A Caution! Pump will start running immediately! |
| Note: |
| Under very frosty conditions you must run the pump constantly |
| and check that it is working. |
GB
21