CARE AND CLEANING

Proper care and cleaning are important so your halogen/radiant cooktop will give you efficient and satisfactory service. If soil, mineral deposits from evaporated water spills or metal rub-off from aluminum cookware is not removed, it will burn on the glass cooktop surface and cause permanent discoloration.

Follow these directions carefully in caring for your cooktop to assure safe and proper maintenance.

Be sure that the surface unit control knobs are turned off and that the entire cooktop is cool before cleaning. Do not use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health and can chemically attack the glass surface.

BE SURE ELECTRICAL POWER IS OFF AND ALL SURFACES ARE COOL BEFORE CLEANING ANY PART OF THE COOKTOP.

Glass Cooktop Cleaning

Control Knobs

It’s a good idea to wipe the control panel after each use. Clean with mild soap and water or vinegar and water, rinse with clean water and polish dry with a soft cloth.

Do not use abrasive cleansers, strong liquid cleansers, plastic scouring pads or oven cleansers on the control panel—they will damage the finish. A 50/50 solution of vinegar and hot water works well.

The control knobs may be removed for easier cleaning.

Before removing the knobs for cleaning, please note that the knobs are in the proper OFF position. When replacing the knobs, check the OFF position to insure proper placement.

Molded Rib

Spring Clip

Clear Groove in Stem

The knob stem has a groove in each side. The groove on one side has a spring clip. The other groove is clear (see illustration). Check the inside of the knob and find the molded rib.

Wash the knobs in soap and water or a vinegar and hot water solution but do not soak.

Replace the knob by fitting the molded rib inside the knob into the clear groove on the stem.

Care

Cooktop Frame

Use the same cleaning methods as those described for the glass ceramic top with the exception of using a scraper. Do not scrape the frame as this will damage the metal surface.

13

and Cleaning

Page 13
Image 13
GE 164D2966P161-1, JP660 operating instructions Care and Cleaning, Control Knobs, Cooktop Frame

164D2966P161-1, JP660 specifications

GE JP660,164D2966P161-1 is a remarkable gas turbine engine that stands out for its high efficiency and reliability in power generation. This engine is primarily utilized in various industrial applications such as electrical generation, natural gas processing, and oil extraction. The JP660 series particularly incorporates advanced technologies that enhance its performance and operational flexibility.

One of the key features of the GE JP660 is its modular design, which simplifies maintenance procedures and reduces downtime during service intervals. This design philosophy not only enhances its reliability but also makes it easier for operators to perform routine inspections and repairs. The engine is capable of achieving high thermal efficiency levels, leading to reduced fuel consumption and a lower carbon footprint, making it an eco-friendly option for energy production.

In terms of technology, the JP660 is equipped with advanced controls and monitoring systems that allow for precise management of the engine's performance, optimizing combustion and improving overall operational efficiency. These integrated systems facilitate remote diagnostics, enabling operators to monitor performance metrics in real time, ensuring that any potential issues are addressed promptly.

The turbine’s materials are engineered for durability and performance, utilizing advanced alloys and coatings that resist high temperatures and corrosive environments. This material technology enhances the overall lifespan of the engine, significantly reducing the need for replacement parts and associated costs.

Another notable characteristic is the turbine’s ability to operate on various fuel types including natural gas, diesel, and biofuels. This flexibility makes it a valuable asset in regions where fuel availability may vary or where specific environmental regulations require diversification of fuel sources.

Additionally, the JP660 is designed with a high power-to-weight ratio, enabling it to deliver substantial output while maintaining a compact footprint. This is particularly advantageous for installations where space is limited.

Overall, the GE JP660,164D2966P161-1 engine exemplifies cutting-edge technology and robust engineering, making it a reliable choice for modern energy demands. Its blend of efficiency, flexibility, and advanced features positions it as a leading solution in the competitive landscape of gas turbine engines.