GLASS COOKTOP CLEANING

Cleaning of glass cooktops is different from cleaning a standard porcelain finish. To maintain and protect the surface of your new glass cooktop follow these basic steps.

Before you use the cooktop for the first time, clean it with cleaning cream. This helps protect the top and makes clean-up easier.

DAILY CLEANING: Use only a recommended cleaning cream, such as Cerama Brite or Cooktop Cleaning Creme, on the glass cooktop.

For normal, light soil:

1.Rub a few drops (less is better) of the cleaning cream onto soiled area using a damp paper towel. Buff with a dry paper towel until all soil and cream are removed. Frequent cleaning leaves a protective coating which is essential in preventing scratches and abrasions.

2.Clean the surface with the cleaning cream after each use.

For heavy, burned on soil:

1.Apply a few drops of the cleaning cream to the (cool) soiled area.

2.Using a damp paper towel, rub the cream into the burned on area. As with any burned on spill, this may require some effort.

3.Carefully scrape soil with razor scraper. Hold scraper at a 30° angle against the glass cooktop.

4.If any soil remains, repeat the steps listed above. For additional protection, after all soil has been removed, polish the entire surface with the cleaning cream.

5.Buff with a dry paper towel.

NOTE:

•Using a razor scraper will not damage the surface if the 30° angle is maintained.

•Be sure to use a new, sharp razor scraper. Do not use a dull or nicked blade.

•Store the razor scraper out of reach of children.

SPECIAL CARE: Sugary spillovers (such as jellies, fudge, candy syrups) or melted plastics can cause pitting of the surface of your cooktop (not covered by the warranty) unless the spill is removed while still hot. Special care should be taken when removing hot substances. Follow these instructions carefully and remove soil while spill is still hot.

1.Turn off all surface units affected by the spillover. Remove hot pans.

2. Wearing an oven mitt, hold the razor scraper at a 30° angle to the cooktop and scrape hot spill to a cool area outside the surface unit.

3.With the spill in a cool area, use a dry paper towel to remove any excess. Any spillover remaining should be left until the surface of the cooktop has cooled.

Do not continue to use the soiled surface unit until all of the spillover has been removed. Follow the steps under Heavy Soil to continue the cleaning process.

COOKTOP SEAL: To clean the cooktop seal, let a wet cloth rest on it for a few minutes, then wipe clean. Use a mild detergent if needed. Do not use a knife or any sharp object on the seal because it will cut or damage it.

GENERAL INFORMATION: As the cleaning cream cleans, it leaves a protective coating on the cooktop surface. This coating helps to prevent build- up of mineral deposits (water spots) and will make future cleaning easier. Dishwashing detergents remove this protective coating and therefore make the cooktop more susceptible to staining.

To conveniently order more cream and/or scrapers for cleaning your glass cooktop, please call our toll free number:

National Parts Center

800-626-2002

Cleaner

# WX10X300

Scraper

# WX5X1614

Cream and scraper kit

# WB64X5027

PRECAUTIONS

•If pots with a thin overlay of aluminum, copper or enamel are allowed to boil dry, the overlay may bond with the glass cooktop and leave a black discoloration. This should be removed immediately before heating again or the discoloration may be permanent.

•Water stains (mineral deposits) are removable using the cleaning cream or full strength white vinegar.

•Use of window cleaner may leave an iridescent film on the cooktop. The cleaning cream will remove this discoloration.

•If you slide aluminum or copper cookware across the surface of your cooktop, they may leave metal markings which appear as scratches. If this should happen, use the razor scraper and cleaning cream to remove these markings. Failure to remove these residues immediately may leave permanent marks.

•Most cleaners contain ammonia, chemicals and abrasives which can damage the surface of your cooktop. Use only the recommended cleaning cream for proper cleaning and protection of your glass cooktop.

Read and follow all instructions and warnings on the cleaning cream labels.

12

Page 11 Page 13
Page 12
Image 12
GE JP660, 164D2966P161-1 operating instructions Glass Cooktop Cleaning, For heavy, burned on soil
Page 11 Page 13

164D2966P161-1, JP660 specifications

GE JP660,164D2966P161-1 is a remarkable gas turbine engine that stands out for its high efficiency and reliability in power generation. This engine is primarily utilized in various industrial applications such as electrical generation, natural gas processing, and oil extraction. The JP660 series particularly incorporates advanced technologies that enhance its performance and operational flexibility.

One of the key features of the GE JP660 is its modular design, which simplifies maintenance procedures and reduces downtime during service intervals. This design philosophy not only enhances its reliability but also makes it easier for operators to perform routine inspections and repairs. The engine is capable of achieving high thermal efficiency levels, leading to reduced fuel consumption and a lower carbon footprint, making it an eco-friendly option for energy production.

In terms of technology, the JP660 is equipped with advanced controls and monitoring systems that allow for precise management of the engine's performance, optimizing combustion and improving overall operational efficiency. These integrated systems facilitate remote diagnostics, enabling operators to monitor performance metrics in real time, ensuring that any potential issues are addressed promptly.

The turbine’s materials are engineered for durability and performance, utilizing advanced alloys and coatings that resist high temperatures and corrosive environments. This material technology enhances the overall lifespan of the engine, significantly reducing the need for replacement parts and associated costs.

Another notable characteristic is the turbine’s ability to operate on various fuel types including natural gas, diesel, and biofuels. This flexibility makes it a valuable asset in regions where fuel availability may vary or where specific environmental regulations require diversification of fuel sources.

Additionally, the JP660 is designed with a high power-to-weight ratio, enabling it to deliver substantial output while maintaining a compact footprint. This is particularly advantageous for installations where space is limited.

Overall, the GE JP660,164D2966P161-1 engine exemplifies cutting-edge technology and robust engineering, making it a reliable choice for modern energy demands. Its blend of efficiency, flexibility, and advanced features positions it as a leading solution in the competitive landscape of gas turbine engines.
Top Page Image Contents