Global Machinery Company SPJ2HM instruction manual Pocket & curve cutting, Metal cutting

Page 13

Switch on the jigsaw and allow

the blade to reach maximumb speed.

Slowly guide the jigsaw forward, building up speed as you go, with one hand on the handle and the other on the scrolling knob, keeping the shoe plate flat against the workpiece (fig b).

Do not force the jigsaw. Use only enough pressure to keep the blade cutting. Do not force the cutting, allow the blade and the saw to do the work.

Pocket & curve cutting

c

In order to start a cut from the centre of the workpiece, you can either drill a hole and insert the blade into the hole then start cutting, or plunge cut (fig c).

When using the hole method,

 

use a 10mm or larger drill to

 

 

ensure that there is sufficient

d

clearance for the blade (fig d).

 

To plunge cut, proceed as

 

follows.

 

Tilt the tool on the front edge

 

of the shoe plate (18) with the

 

point of the blade just above the

 

workpiece (fig e).

 

 

Switch on, wait for the blade to

 

 

 

e

reach maximum speed, hold the

 

 

 

front edge of the shoe plate (18)

 

 

securely against the workpiece

 

 

and slowly lower the rear of the

 

 

saw so that the blade penetrates

 

 

the workpiece.

 

 

When the shoe plate is flush

 

 

with the surface of the workpiece, proceed with cutting in the normal manner.

When cutting tight curves, reduce the speed of the saw.

WARNING. Do not move the saw forward

along its cut until the blade has completely entered the material and the shoe comes to rest on its surface.

Metal cutting

NOTES.

•When cutting metal ALWAYS clamp down the metal workpiece.

•Be extremely careful to move the saw very slowly as you cut. Use slower speeds (Position 1 on the speed controller).

DO NOT twist, bend or force the blade.

•When cutting metals, a suitable cooling/cutting oil must be used. Squirt the lubricant onto the blade or workpiece at regular intervals during cutting in order to reduce wear on the blade.

•If the saw jumps or bounces as you cut, change to a blade with finer teeth.

•If the blade begins to clog when cutting soft metal, change to a blade with coarser teeth.

•For easier cutting, lubricate

the blade with a stick of cuttingf

wax (if available) or cutting oil when cutting steel (fig f).

•Thin metal should be sandwiched between two pieces of wood or tightly clamped on a single piece of wood (wood on top of the

metal). Draw the cut lines or design on the top piece of wood.

•When cutting aluminum extrusion or angle iron, clamp the work in a bench vice and saw close to the vice jaws.

•When sawing tubing with a diameter larger than the blade is deep, cut through the wall of the tubing and then insert the blade into the cut, rotating the tube as you saw.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 710W Scrolling Pendulum Action Jigsaw Contents Specifications Description of symbolsIntroduction Environmental protectionGeneral safety rules Safety rules for laser lightsKeep work area clean and well lit. Cluttered Do not expose power tools to rain or wet conditionsPower tool use and care Additional safety rules for jigsawsDo not use the power tool if the switch does not turn Assembly AccessoriesUnpacking Know your product Blade guard Trigger switchBlade guide Anti splintering insertChanging a blade Pendulum adjustmentBlade storage Removing the bladeScrolling control Angle adjustmentVariable speed dial Barrel modeParallel guide Laser sightingDust control SafetyOperation Metal cutting Pocket & curve cuttingPower cord maintenance MaintenanceCleaning Parallel cuts Achieved using the parallel guidePage GMC customer assist

SPJ2HM specifications

Global Machinery Company (GMC) has made a significant impact on the industrial landscape, and one of its standout products is the SPJ2HM, a versatile and efficient machine designed for a variety of applications. As a reflection of GMC’s commitment to innovation and quality, the SPJ2HM combines advanced technologies with user-friendly features, making it suitable for both seasoned professionals and those new to the field.

The SPJ2HM is engineered with a robust construction, ensuring reliability and durability even in the most demanding environments. One of its most remarkable features is the high-performance motor, which provides exceptional power while maintaining energy efficiency. This not only minimizes operational costs but also aligns with the growing trend towards sustainable and eco-friendly industrial practices.

Advanced control systems are another hallmark of the SPJ2HM, enabling precise operation and automation capabilities. This machine is equipped with an intuitive user interface that allows operators to seamlessly navigate settings and monitor performance metrics. Features such as programmable cycles and real-time diagnostics enhance productivity and reduce downtime, making it an invaluable asset for manufacturers seeking to optimize their processes.

The SPJ2HM also embraces cutting-edge technologies like IoT connectivity, allowing for remote monitoring and maintenance scheduling. This integration supports predictive maintenance, which is vital in preventing unexpected breakdowns and prolonging the lifespan of the machinery. With detailed analytics provided through connected platforms, companies can gain insights into operational efficiency and make data-driven decisions.

In terms of versatility, the SPJ2HM is designed to accommodate a wide range of tooling and attachments, making it adaptable to various tasks - from precision machining to heavy-duty fabrication. This flexibility is complemented by a compact design, which allows for easy integration into existing workflows and limited spaces.

In conclusion, the Global Machinery Company SPJ2HM is a testament to the fusion of reliability, efficiency, and technological advancements in the machinery industry. Its robust features, user-centered design, and state-of-the-art connected capabilities position it as a leading choice for companies aiming to enhance their operational efficiency while embracing modern industrial practices. As GMC continues to innovate, the SPJ2HM remains a prime example of how machinery can evolve to meet the challenges of today’s dynamic manufacturing environment.
Top Page Image Contents