General safety instructions

To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating instructions to be found in this Manual. All persons who use and service the machine have to be acquainted with this Manual and must be informed about its potential hazards. Children and infirm people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety.

Warning. When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Also, please read and heed the advice given in the additional important safety instructions.

1.Keep the work area clean and tidy. Cluttered work areas and benches invite accidents and injury.

2.Consider the environment in which you are working. Do not use power tools in damp or wet locations. Keep the work area well lit. Do not expose power tools to rain. Do not use power tools in the presence of flammable liquids or gases.

3.Keep visitors away from the work area. All visitors and onlookers, especially children and infirm persons, should be kept well away from where you are working. Do not let others in the vicinity make contact with the tool or extension cord.

4.Store tools safely. When not in use, tools should be locked up out of reach.

5.Do not force the tool. The tool will do the job better and safer working at the rate for which it was designed.

6.Use the correct tool for the job. Do not force small tools or attachments to do the job best handled by a heavier duty tool. Never use a tool for a purpose for which it was not intended.

7.Dress correctly. Do not wear loose clothing or jewellery. They can be caught in moving parts. Rubber gloves and non-slip footwear are recommended when working outdoors. If you have long hair, wear a protective hair covering.

8.Use safety accessories. Safety glasses and earmuffs should always be worn. A face or dust mask is also required if the sanding operation creates dust.

9.Do not abuse the power cord. Never pull the cord to disconnect the tool from the power point. Keep the cord away from heat, oil and sharp edges.

10.Secure the work piece. Use clamps or a vice to hold the work piece. It is safer than using your hand and frees both hands to operate the tool.

11.Do not overreach. Keep your footing secure and balanced at all times.

12.Look after your tools. Keep tools sharp and clean for better and safer performance. Follow the instructions regarding lubrication and accessory changes. Inspect tool cords periodically and, if damaged, have them repaired by an authorised service facility. Inspect extension cords periodically and replace them if damaged. Keep tool handles dry, clean and free from oil and grease.

13.Disconnect idle tools. Switch off the power and disconnect the plug from the power point before servicing, when changing accessories and when the tool is not in use.

14.Remove adjusting keys and wrenches. Check to see that keys and adjusting wrenches are removed from the tool before switching on.

15.Avoid unintentional starting. Always check that the switch is in the OFF position before plugging in the tool to the power supply. Do not carry a plugged in tool with your finger on the switch.

16.Use outdoor rated extension cords. When a tool is used outdoors, use only extension cords that are intended for outdoor use and are so marked.

AC40L specifications

Global Machinery Company's AC40L is a cutting-edge piece of equipment designed to meet the diverse needs of industries seeking efficiency, versatility, and reliability in their machinery. This model stands out in the realm of construction and heavy-duty equipment due to its advanced engineering and robust performance capabilities.

One of the primary features of the AC40L is its powerful engine. Designed with energy efficiency in mind, the engine delivers substantial torque, allowing it to handle a wide range of tasks from loading and unloading materials to maneuvering on challenging terrains. This robust powertrain not only enhances productivity but also minimizes operational downtime, making the AC40L a trusted choice for continuous work environments.

The AC40L is equipped with an advanced hydraulic system that allows for precise control during operations. This technology ensures that the machinery can perform intricate tasks with ease, significantly reducing the risk of errors or accidents. The system features a quick-attach interface, enabling operators to switch implements swiftly, adapting to various job requirements without hassle.

Ergonomics is a key consideration in the design of the AC40L. The operator cab is spacious and fitted with intuitive controls, allowing for comfortable and efficient operation. Enhanced visibility from the cab ensures that operators can always maintain awareness of their surroundings, which is critical in busy job sites. Additionally, the inclusion of climate control features ensures a comfortable working environment, effectively reducing operator fatigue.

Durability is another notable characteristic of the AC40L. Built with high-grade materials, the machinery is designed to withstand the rigorous demands of heavy-duty operations. Components are engineered for longevity, reducing maintenance needs and prolonging the lifespan of the equipment.

In terms of safety, Global Machinery Company has integrated advanced safety features, including rollover protection and stability control, which enhance operator confidence while working in potentially hazardous conditions.

Overall, the Global Machinery Company AC40L stands as a testament to innovative engineering, bringing together power, efficiency, and safety to meet the expectations of modern industries. This machine is not only an investment in productivity but also a commitment to the quality and reliability that Global Machinery Company is known for. Whether on a construction site, in landscaping, or involved in other heavy-duty applications, the AC40L proves to be an indispensable ally in achieving operational goals.