Warning labels explained
On the tank of your air compressor you will notice various warnings about the operation of the compressor. These warnings and the procedures associated with them are explained fully in this manual on the following pages.
Please take note of these. They are important for your safety and that of others in the vicinity.
��������
•Do not switch on without first checking the oil level and, if required, filling with oil.
•Always turn the compressor off at the On/Off switch on the compressor before turning off at the power supply.
��������
Unit starts
automatically.
Switch off power supply,
remove plug & relieve
air pressure prior
to commencing
service tasks.
���������
Check the oil level before starting the
compressor every time.
Make sure the compressor is on a level surface prior to checking the oil level.
The oil level is required to be at the red dot on the oil level sight glass prior to use.
Use only oil grade specified in the
instruction manual.
����������
To prevent
����������������
When filter becomes dirty or oily, clean or replace filter. Refer to instruction manual.
��������� | ������� | �������� | �������� | |
Read instruction manual | High voltage used on | Air discharged from | Test the safety relief | |
prior to starting unit. | this equipment. Prior to | this unit is not | valve daily. | |
This equipment | servicing or removing the | suitable for human | Refer the instruction | |
cover, switch off the | consumption. | |||
operates from | manual. | |||
power supply & remove |
| |||
AC mains only. |
|
| ||
plug from mains. Ensure |
|
| ||
|
|
| ||
| mains outlet is adequately |
|
| |
| rated for this unit. |
|
|
3