Grizzly H8231, H8230 Before Operating This Equipment, Safety Instructions For Pneumatic Tools

Page 2

SAFETY

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazard- ous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures.

Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

 

Indicates a potentially hazardous situation which, if

 

not avoided, COULD result in death or serious injury.

 

Indicates a potentially hazardous situation which, if

 

not avoided, MAY result in minor or moderate injury.

 

It may also be used to alert against unsafe practices.

NOTICE

This symbol is used to alert the user to useful informa-

tion about proper operation of the equipment.

Safety Instructions For Pneumatic Tools

1.KEEP ALL SAFETY DEVICES IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of check- ing to see that keys and adjusting wrenches are removed from tool before operation.

3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

4.DO NOT USE IN DANGEROUS ENVIRONMENT. Do not use pneu- matic tools in damp or wet locations, or where any flammable or noxious fumes may exist. Keep work area well lighted.

5.KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept at a safe distance from work area.

6.MAKE WORKSHOP CHILD PROOF by locking your shop and shutting off air valves.

7.DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE THE RIGHT TOOL. Do not force tool or attachment to do a job for which it was not designed.

9.DO NOT USE UNDER THE INFLUENCE OF DRUGS OR ALCOHOL.

Image 2
Contents Coil Roofing Nailer Before Operating This Equipment SafetySafety Instructions For Pneumatic Tools H8230/H8231 15 Roofing Nailer Additional Safety Instructions for Nailers Introduction Foreword Machine DataSET UP UnpackingInventoryCompressed Air System Safety Check Safety Check #1-NoseOperations LoadingFiring Nails To fire a nailAdjusting Depth Single/Bump Fire OperationReplacing Pistons/O Rings Accessories Replacement 15 Coil NailsCleaning & Lubrication CleaningLubricatingTroubleshooting Symptom Possible Cause SolutionParts BreakdownH8230 Parts List REF DescriptionH8231 Parts H8231 Parts List Warranty and Returns