INTRODUCTION
Foreword | Model H7944 |
| Specifications |
|
We are proud to offer the Grizzly Model H7943/H7944 framing nailer. This nailer is part of a growing Grizzly family of fine pneumatic tools. When used according to the guidelines set forth in this manual, you can expect years of
The Model H7943/H7944 features a 360° exhaust port and a comfort grip rubber handle. It is also economical in air con- sumption, able to fire
The specifications, details, and photo- graphs in this manual represent Model H7943/H7944 as supplied when this manual was prepared. However, owing to Grizzly’s policy of continuous improve- ment, changes may be made at any time with no obligation on the part of Grizzly.
Model H7943
Specifications
Nail Type | Roundhead |
Nail Angle | 21° |
Nail Diameter | 0.113" - 0.161" |
Nail Length | |
Magazine Capacity | 66 Nails |
Air Inlet | 3/8" NPT |
Weight | 7.75 lbs. |
Operating Pressure |
Nail Type | Clipped Head |
Nail Angle | 34° |
Nail Diameter | 0.113" - 0.161" |
Nail Length | |
Magazine Capacity | 90 Nails |
Air Inlet | 3/8" NPT |
Weight | 7.85 lbs. |
Operating Pressure |
Contact Info
If you have any comments regarding this manual, please write to us at the following address:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA
Email: Manuals@grizzly.com
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
H7943 /H7944 Framing Nailer |