Grizzly H7679 instruction manual Clearing Jammed Nails

Page 12

Clearing Jammed

Nails

A jammed nail must be cleared before using the nailer again.

To clear a jammed nail from the dis- charge area:

1.DISCONNECT NAILER FROM THE AIR SUPPLY!

2.Unlatch and pull the magazine all the way back.

3.Remove the nail stick from the maga- zine.

4.Open the nailer nose with the nose release lever (Figure 7).

Nose Cover

Nose Release

Lever

Nose Tip

Figure 7. Nose opened to clear a jam.

5.Dislodge the jammed nail with a tool that will fit in the slot on the underside of the nose, like needle nose pliers.

6.Throw the damaged nail away and insert a new nail stick that only contains clean, undamaged nails. DO NOT use dirty or damaged nails!

7.Push the magazine all the way in until the catch lever locks.

-10-

H7679 2" Nailer Kit

Image 12
Contents Nailer KIT Safety Safety Instructions For Pneumatic ToolsBefore Operating This Equipment Wear Approved Hearing Protection Additional Safety Instructions for Nailers H7679 2 Nailer Kit Specifications IntroductionForeword Contact InfoSET UP UnpackingInventoryCompressed Air System Safety Nose Mechanism Disconnect Nailer from the AIR SupplyOperations LoadingOperating Adjusting Depth Clearing Jammed Nails Replacing Pistons/O Rings Cleaning & Lubrication CleaningLubricatingH7679 Parts Breakdown H7679 Parts List DescriptionTroubleshooting Symptom Possible Cause SolutionWarranty and Returns Warranty Card Place Stamp Here