Grizzly instruction manual H7679 2 Nailer Kit

Page 5

Operating this nailer can propel objects into the air, causing imme- diate eye damage. To protect your- self, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment. In addition, this nailer discharges at up to 90 deci- bels. To protect your hearing, always wear ANSI approved ear protection when operating this nailer.

Never point this nailer at yourself or another person! Always pay attention to the direction this nailer is pointed. Use this tool with respect and caution to lessen the possibility of operator or bystander injury. Ignoring this warning may result in serious personal injury.

Nailer/stapler accidents routinely hap- pen while moving the gun to another location, such as up ladders, to anoth- er room, or even another job site. Always disconnect the gun immedi- ately after use and never transport the gun while connected to the air—even if the air compressor is disconnected from its power source!

No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect. Failure to do so could result in serious personal injury, damage to equipment or poor work results.

H7679 2" Nailer Kit

-3-

Image 5
Contents Nailer KIT Before Operating This Equipment Safety Safety Instructions For Pneumatic Tools Wear Approved Hearing Protection Additional Safety Instructions for Nailers H7679 2 Nailer Kit Introduction SpecificationsForeword Contact InfoUnpackingInventory SET UPCompressed Air System Disconnect Nailer from the AIR Supply Safety Nose MechanismOperating OperationsLoading Adjusting Depth Clearing Jammed Nails Replacing Pistons/O Rings CleaningLubricating Cleaning & LubricationH7679 Parts Breakdown Description H7679 Parts ListSymptom Possible Cause Solution TroubleshootingWarranty and Returns Warranty Card Place Stamp Here