Dimplex SI 100ZS, SI 75ZS, SI 50ZS manual Accessories, Transport, Connecting Flanges

Page 5

ACCESSORIES TRANSPORT

4ACCESSORIES

4.1 Connecting Flanges

The use of flat-sealing connecting flanges allows the unit, as an option, to be connected by means of flanges.

5TRANSPORT

For the transport by means of a hand truck or boiler trolley, position the latter under the front end of the unit below the transport security device.

For transport on a level surface, the unit can be lifted from the rear or from the front by means of a lift truck or forklift. In this case, the transport securing device is not imperative.

45°

45°

CAUTION! The heat pump must not be tilted more than max. 45° (in either direction).

After the transport, the transport securing device is to be removed on either side at the bottom of the unit.

Remove/install transport securing device

CAUTION! The transport securing device is to be removed after the transport.

5

Image 5

Contents Operating Instructions Purpose of Heat Pump Energy-Efficient Use of the Heat Pump Read ImmediatelyImportant Information Legal Provisions and Guidelines Scope of Delivery Purpose of the Heat PumpApplication Principle of OperationTransport AccessoriesConnecting Flanges Mounting InstallationGeneral Information Sound EmissionsElectrical Connection Connection on Heat Source SidePreparatory Steps Commissioning ProcedureCommissioning Cleaning of Heating Side CARE/CLEANINGCleaning of Heat Source Side CareCorrection of Minor Malfunctions by Owner Malfunctions 11DECOMMISSIONING TroubleshootingSummer Shutdown End-of-Life Decommissioning/ DisposalEquipment Data Diagrams Dimensioned DrawingsWiring Diagrams AppendixDimensioned Drawing SI 50ZS Dimensioned Drawing SI 75ZS Dimensioned Drawing SI 100ZS Equipment Data Evaporator Characteristic Curves SI 50ZSCharacteristic Curves SI 75ZS Characteristic Curves SI 100ZS Control Load Input Terminal DiagramEVS Hydraulic Block Diagram Example EC Declaration of Conformity Page Page