Clearing Jammed Nails
The most frequent situation with any type of nailer is a nail jam. A jammed nail must be cleared before using the nailer again. The two places where a nail can get jammed are the magazine and the dis- charge area.
Always disconnect air from nailer whenever clearing a jammed nail!
To clear a jammed nail from the magazine:
1.Disconnect the nailer from the air supply!
2. Pull the magazine pusher all the way back until it locks in place.
3.Locate and remove the jammed nail with a pair of needle nose pliers. Close the magazine cover so it latch- es.
To clear a jammed nail from the discharge area with the Model G6050:
1.Disconnect the nailer from the air supply!
2.Pull the magazine pusher all the way back until it locks in place.
3.Remove all nails from the magazine.
4.Locate the nail inside of the nailer nose.
5.Find a tool that will fit inside the slot on the underside of the nose and dis- lodge the nail.
6.Throw the damaged nail away and insert a new nail stick that only con- tains clean, undamaged nails. DO NOT use dirty or damaged nails in your nailer!
G6050 Round Head Framing Nailer Kit |