Grizzly H2912, H2913 instruction manual Safety, Before Operating This Equipment

Page 2

SAFETY

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progres- sion of symbols is described below. Remember that safety messages by them- selves do not eliminate danger and are not a substitute for proper accident pre- vention measures.

Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. It may also be used to alert against unsafe practices.

NOTICE This symbol is used to alert the user to useful information about proper operation of the equipment.

Safety Instructions For Power Tools

1.KEEP ALL SAFETY DEVICES IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of check- ing to see that keys and adjusting wrenches are removed from tool before operation.

3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

4.DO NOT USE IN DANGEROUS ENVIRONMENT. Do not use power tools in damp or wet locations, or where any flammable or noxious fumes may exist. Keep work area well lighted.

5.KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area.

6.MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.

7.DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE THE RIGHT TOOL. Do not force tool or attachment to do a job for which it was not designed.

9.DO NOT USE UNDER THE INFLU- ENCE OF DRUGS OR ALCOHOL.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents IN-1 NAILER/STAPLER KIT Model H2912/H2913Safety Before Operating This EquipmentAMP Length Rating Nailer/Stapler Safety Introduction CommentarySafety Yoke Mechanism Compressed Air SystemLoading The Nailer/Stapler Depth AdjustmentOperation Operating The Nailer/StaplerClearing Jammed Staples/Nails Disconnect the nailer/stapler from the air supplyCleaning The Nailer/Stapler Oiling The Nailer/StaplerReplacing Pistons/O-Rings H2912 Part Breakdown 07 PH2912007 Piston Stopper H2913 Part Breakdown 07 PH2913007 Piston Stopper Troubleshooting Problem Cause ActionWarranty and Returns Warranty Card Place Stamp Here

H2912, H2913 specifications

Grizzly H2913 and H2912 are two advanced models in the Grizzly lineup, designed for woodworking enthusiasts and professionals who demand precision and versatility in their tools. These models are particularly noted for their robust construction, ensuring durability and long-lasting performance for a wide range of applications.

The Grizzly H2913 is a powerful 12-inch planer that stands out for its impressive planing capacity and efficient motor. One of its main features is the combination of a helical cutter head, which enhances cutting performance by providing a smoother finish with minimal tear-out. This innovative design utilizes multiple carbide-tipped inserts that allow for easy replacement, saving time and ensuring consistent results with every use. The planer offers variable feed rates, enabling users to adjust the pace depending on the material being worked on, further enhancing its adaptability.

On the other hand, the Grizzly H2912 is a 15-inch thickness planer, ideal for larger workpieces and more demanding tasks. This model also features a helical cutter head, providing the same benefits as the H2913, including a higher-quality finish and reduced noise levels during operation. The H2912 is equipped with a robust cast iron table, which contributes to its stability and reduces vibration while planing. This reliable construction results in a flatter surface, crucial for achieving precise thickness.

Both models are designed with user convenience in mind. They come with easy-to-read digital displays that provide precise thickness adjustments, making it simple for users to set their desired dimensions. Additionally, the integrated dust collection ports help maintain a clean workspace by efficiently directing debris away from the machine.

Moreover, Grizzly H2913 and H2912 feature durable built-in handles for easy transport and adjustment, allowing users to move them effortlessly between different work areas. The overall design reflects a commitment to quality and user friendliness, ensuring these planers can meet the demands of both novice woodworkers and seasoned professionals alike.

In summary, the Grizzly H2913 and H2912 represent a blend of cutting-edge technology and traditional craftsmanship, making them essential additions to any workshop focused on premium woodworking. Whether you prioritize planing quality, operational efficiency, or user-friendly features, these models deliver outstanding performance tailored to various woodworking projects.
Top Page Image Contents