Grizzly H2912, H2913 instruction manual Nailer/Stapler Safety

Page 4

Nailer/Stapler Safety

In addition to the rules stated in the previ- ous section, and those in the warning boxes throughout this manual, please observe the following safety tips for your new nailer/stapler:

1.READ THIS ENTIRE MANUAL BEFORE OPERATING THE NAIL- ER/STAPLER.

2.ALWAYS DISCONNECT AIR FROM THE NAILER/STAPLER whenever servicing or installing nails or staples. During maintenance, a nailer/stapler connected to air may fire accidentally, causing serious personal injury.

3.DO NOT PLACE HANDS NEAR STAPLE OR NAIL POINT OF ENTRY. Nails or staples can deflect and tear through the surface of the workpiece, puncturing your hand or fingers.

4.NEVER CONNECT THE NAILER/STAPLER TO PRESSUR- IZED OXYGEN OR OTHER COM- BUSTIBLE GASES as a power source. Only use filtered, lubricated, and regulated compressed air.

5.NEVER USE GASOLINE OR OTHER FLAMMABLE LIQUIDS TO CLEAN THE NAILER/STAPLER. Vapors in the tool will ignite by a spark and cause the tool to explode.

6.DO NOT CARRY THE NAILER/STA- PLER BY ANY OTHER PART THAN THE HANDLE, and do not carry the nailer/stapler by the air hose.

7.DO NOT KEEP THE TRIGGER PULLED ON THE SAFETY YOKE MECHANISM WHEN CARRYING OR HOLDING THE TOOL.

8.DO NOT USE A CHECK VALVE OR ANY OTHER FITTING that allows air to remain in the tool.

-3-

Operating the nailer/stapler can pro- pel objects into the air, causing immediate eye damage. To protect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when operating this equipment. In addition, the nailer/stapler dis- charges at 85-90 decibels. To protect your hearing, always wear ANSI approved ear protection when oper- ating this tool.

Never point the nailer/stapler at your- self or another person! Always pay attention to the direction the nailer/stapler is pointed. Use this tool with respect and caution to lessen the possibility of operator or bystander injury. Ignoring this warning may result in serious personal injury.

H2912/H2913 2-IN-1 NAILER/STAPLER

Image 4
Contents IN-1 NAILER/STAPLER KIT Model H2912/H2913Safety Before Operating This EquipmentAMP Length Rating Nailer/Stapler Safety Introduction CommentarySafety Yoke Mechanism Compressed Air SystemDepth Adjustment OperationLoading The Nailer/Stapler Operating The Nailer/StaplerClearing Jammed Staples/Nails Disconnect the nailer/stapler from the air supplyCleaning The Nailer/Stapler Oiling The Nailer/StaplerReplacing Pistons/O-Rings H2912 Part Breakdown 07 PH2912007 Piston Stopper H2913 Part Breakdown 07 PH2913007 Piston Stopper Troubleshooting Problem Cause ActionWarranty and Returns Warranty Card Place Stamp Here

H2912, H2913 specifications

Grizzly H2913 and H2912 are two advanced models in the Grizzly lineup, designed for woodworking enthusiasts and professionals who demand precision and versatility in their tools. These models are particularly noted for their robust construction, ensuring durability and long-lasting performance for a wide range of applications.

The Grizzly H2913 is a powerful 12-inch planer that stands out for its impressive planing capacity and efficient motor. One of its main features is the combination of a helical cutter head, which enhances cutting performance by providing a smoother finish with minimal tear-out. This innovative design utilizes multiple carbide-tipped inserts that allow for easy replacement, saving time and ensuring consistent results with every use. The planer offers variable feed rates, enabling users to adjust the pace depending on the material being worked on, further enhancing its adaptability.

On the other hand, the Grizzly H2912 is a 15-inch thickness planer, ideal for larger workpieces and more demanding tasks. This model also features a helical cutter head, providing the same benefits as the H2913, including a higher-quality finish and reduced noise levels during operation. The H2912 is equipped with a robust cast iron table, which contributes to its stability and reduces vibration while planing. This reliable construction results in a flatter surface, crucial for achieving precise thickness.

Both models are designed with user convenience in mind. They come with easy-to-read digital displays that provide precise thickness adjustments, making it simple for users to set their desired dimensions. Additionally, the integrated dust collection ports help maintain a clean workspace by efficiently directing debris away from the machine.

Moreover, Grizzly H2913 and H2912 feature durable built-in handles for easy transport and adjustment, allowing users to move them effortlessly between different work areas. The overall design reflects a commitment to quality and user friendliness, ensuring these planers can meet the demands of both novice woodworkers and seasoned professionals alike.

In summary, the Grizzly H2913 and H2912 represent a blend of cutting-edge technology and traditional craftsmanship, making them essential additions to any workshop focused on premium woodworking. Whether you prioritize planing quality, operational efficiency, or user-friendly features, these models deliver outstanding performance tailored to various woodworking projects.