Grizzly G6049 instruction manual Basic Nailer Safety

Page 4

Basic Nailer Safety

In addition to the rules stated in the previ- ous section, and those in the warning boxes throughout this manual, please observe the following safety tips for your new nailer:

1.READ THIS ENTIRE MANUAL BEFORE OPERATING THE NAIL- ER.

2.ALWAYS DISCONNECT AIR FROM THE NAILER whenever servicing or installing nails. During maintenance, a nailer connected to air may fire acci- dentally, causing serious personal injury.

3.DO NOT PLACE HANDS NEAR NAIL POINT OF ENTRY. Nail can deflect and be driven through the sur- face of the workpiece, puncturing your hand or fingers.

4.NEVER CONNECT THE NAILER TO

PRESSURIZED OXYGEN OR OTHER COMBUSTIBLE GASES as a power source. Only use filtered, lubricated, and regulated compressed air.

5.ALWAYS KEEP ANY BYSTANDERS BEHIND NAILER OR AWAY FROM AREA DURING USE. Nails may be driven completely though wood and could become dan- gerous projectiles.

6.DO NOT CARRY THE NAILER BY ANY OTHER PART THAN THE HANDLE, and do not carry the nailer by the air hose.

7.DO NOT KEEP THE TRIGGER PULLED ON THE SAFETY YOKE MECHANISM WHEN CARRYING OR HOLDING THE TOOL.

8.DO NOT USE A CHECK VALVE OR ANY OTHER FITTING that allows air to remain in the tool.

G6049 14/15 Gauge Angle Finish Nailer Kit

Operating this nailer can propel objects into the air, causing immedi- ate eye damage. To protect yourself, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment. In addition, this nailer discharges at 85-90 decibels. To protect your hearing, always wear ANSI approved ear protection when operating this nailer.

Never point this nailer at yourself or another person! Always pay attention to the direction this nailer is pointed. Use this tool with respect and caution to lessen the possibility of operator or bystander injury. Ignoring this warn- ing may result in serious personal injury.

-3-

Image 4
Contents 14/15 Gauge Angle Finish Nailer KIT Model G6049Safety Before Operating This EquipmentSafety Instructions For Pneumatic Tools Basic Nailer Safety Introduction CommentarySafety Yoke Mechanism Compressed Air SystemOperation Single/Bump Fire ModeLoading Nailer Adjusting Depth Operating NailerClearing Jammed Nails Disconnect the nailer from the air supplyCleaning Nailer Oiling NailerReplacing Pistons/O-Rings G6049 Part Breakdown 35A 15A 16A 7A92Description Troubleshooting Problem Cause ActionWarranty and Returns Warranty Card Place Stamp Here