Grizzly G6046, G6047 instruction manual Safety, Before Operating This Equipment

Page 2

SAFETY

For Your Own Safety Read Instruction Manual

Before Operating This Equipment

The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progres- sion of symbols is described below. Remember that safety messages by them- selves do not eliminate danger and are not a substitute for proper accident pre- vention measures.

Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. It may also be used to alert against unsafe practices.

NOTICE This symbol is used to alert the user to useful information about proper operation of the equipment.

Safety Instructions For Power Tools

1.KEEP ALL SAFETY DEVICES IN PLACE and in working order.

2.REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of check- ing to see that keys and adjusting wrenches are removed from tool before operation.

3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

4.DO NOT USE IN DANGEROUS ENVIRONMENT. Do not use power tools in damp or wet locations, or where any flammable or noxious fumes may exist. Keep work area well lighted.

5.KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area.

6.MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.

7.DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed.

8.USE THE RIGHT TOOL. Do not force tool or attachment to do a job for which it was not designed.

9.DO NOT USE UNDER THE INFLU- ENCE OF DRUGS OR ALCOHOL.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Gauge Brad Nailer Model G6045/G6046/G6047Safety Before Operating This EquipmentAMP Length Rating Basic Nailer Safety Introduction CommentarySafety Yoke Mechanism Compressed Air SystemOperation Loading Nailer Operating NailerCleaning Nailer Oiling NailerClearing Jammed Nails Disconnect the nailer from the air supplyReplacing Pistons/O-Rings G6045PBREAKDOWNART These items are not shown in the illustration G6046PBREAKDOWNART 27 P6046027 Guide Safety LVR Breakdown G6047PART24 P6047024 Retaining Ring Troubleshooting Problem Cause ActionWarranty and Returns Warranty Card Place Stamp Here

G6047, G6046 specifications

Grizzly Industrial is a renowned name in the woodworking and metalworking industry, and their G6046 and G6047 model series are no exceptions. These machines are designed to meet the needs of both hobbyists and professionals, providing precision, efficiency, and versatility in various applications.

The Grizzly G6046 is a heavy-duty vertical band saw that excels in cutting large and thick material with incredible accuracy. This model features a robust cast-iron frame, which provides exceptional stability during operation. The saw is equipped with a powerful 3 HP motor, allowing it to deliver impressive cutting capacities ranging from thick hardwoods to softwoods with ease. The G6046 also includes a large table surface, ensuring ample workspace for handling larger pieces.

One of the standout features of the G6046 is its precision guide system, which utilizes both upper and lower blade guides to ensure that the blade remains stable during operation. This minimizes wandering and maximizes cutting accuracy. Additionally, the integrated dust collection port facilitates a cleaner working environment by directing sawdust away from the blade and workpiece.

On the other hand, the Grizzly G6047 is a vertical bandsaw that offers extended capabilities for users. Similar to the G6046, it incorporates a powerful motor and solid construction, but it also includes a significantly larger cutting capacity, making it ideal for larger projects. The G6047 can manage more extensive pieces of wood and other materials, further enhancing its versatility in a professional setting.

Both models are designed with user-friendliness in mind. The blade tension adjustment system on both the G6046 and G6047 is easy to use, allowing for quick adjustments to suit different cutting needs. The adjustable guides also enable users to set up for various kerf widths, improving operational versatility.

In conclusion, the Grizzly G6046 and G6047 are exceptional machines that cater to a wide range of woodworking and metalworking applications. With their powerful motors, sturdy construction, and user-friendly features, these vertical band saws are excellent choices for craftsmen seeking quality and reliability in their tools. Whether for a workshop or a professional shop floor, the G6046 and G6047 stand out as strong contenders in the market, combining innovative technology with ease of use.
Top Page Image Contents