Grizzly G6046, G6047 instruction manual Oiling Nailer, Cleaning Nailer

Page 8

Besides damaging your workpiece, deflection can cause injury if your free hand is securing the workpiece in the location that the nail deflects.

4.Press the trigger. If the brad nail drove into the wood far enough, continue with your intended operations. If the brad nail either went too far or not far enough, then adjust the air pressure. More air pressure will make the brad nail go deeper and less air pressure will decrease the brad nail penetra- tion.

Oiling Nailer

Special oil has been included with your new Grizzly nailer to help maintain its use- ful life. Place one drop of oil in the nailer air inlet (as shown in Figure 4) before every use. Wipe off any excess oil near the nail- er exhaust to avoid dust build-up. When the oil that was included with the nailer has been completely used, replace with Grizzly Model G2820 pnuematic tool oil.

Another option to manual oiling would be to install a lubricator in your air compressor line. If your air compressor line already has a lubricator, then regular lubrication of your nailer will not be necessary. Just make sure there is always oil in the lubricator.

As mentioned before, the best option is to install a filter/lubricator/regulator unit such as the Grizzly Model H2333 in your air line.

Cleaning Nailer

Never use use gasoline or other flam- mable liquids to clean this tool. Vapors in the tool may ignite, causing the tool to explode. Ignoring this warning may lead to serious personal injury or even death!

Use a good solvent to clean the nose assembly of the nailer. Always be sure that the nailer is dry before using it again.

Do not allow dust, chips, sand, etc. into the air connectors or into the body of the nail- er; this may result in leaks and damage to the nailer and the air couplings.

Figure 4. Lubricating nailer via air inlet.

 

G6045/G6046/G6047 18 Gauge Brad Nailer

-7-

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Gauge Brad Nailer Model G6045/G6046/G6047Safety Before Operating This EquipmentAMP Length Rating Basic Nailer Safety Introduction CommentarySafety Yoke Mechanism Compressed Air SystemOperation Loading Nailer Operating NailerCleaning Nailer Oiling NailerClearing Jammed Nails Disconnect the nailer from the air supplyReplacing Pistons/O-Rings G6045PBREAKDOWNART These items are not shown in the illustration G6046PBREAKDOWNART 27 P6046027 Guide Safety LVR Breakdown G6047PART24 P6047024 Retaining Ring Troubleshooting Problem Cause ActionWarranty and Returns Warranty Card Place Stamp Here

G6047, G6046 specifications

Grizzly Industrial is a renowned name in the woodworking and metalworking industry, and their G6046 and G6047 model series are no exceptions. These machines are designed to meet the needs of both hobbyists and professionals, providing precision, efficiency, and versatility in various applications.

The Grizzly G6046 is a heavy-duty vertical band saw that excels in cutting large and thick material with incredible accuracy. This model features a robust cast-iron frame, which provides exceptional stability during operation. The saw is equipped with a powerful 3 HP motor, allowing it to deliver impressive cutting capacities ranging from thick hardwoods to softwoods with ease. The G6046 also includes a large table surface, ensuring ample workspace for handling larger pieces.

One of the standout features of the G6046 is its precision guide system, which utilizes both upper and lower blade guides to ensure that the blade remains stable during operation. This minimizes wandering and maximizes cutting accuracy. Additionally, the integrated dust collection port facilitates a cleaner working environment by directing sawdust away from the blade and workpiece.

On the other hand, the Grizzly G6047 is a vertical bandsaw that offers extended capabilities for users. Similar to the G6046, it incorporates a powerful motor and solid construction, but it also includes a significantly larger cutting capacity, making it ideal for larger projects. The G6047 can manage more extensive pieces of wood and other materials, further enhancing its versatility in a professional setting.

Both models are designed with user-friendliness in mind. The blade tension adjustment system on both the G6046 and G6047 is easy to use, allowing for quick adjustments to suit different cutting needs. The adjustable guides also enable users to set up for various kerf widths, improving operational versatility.

In conclusion, the Grizzly G6046 and G6047 are exceptional machines that cater to a wide range of woodworking and metalworking applications. With their powerful motors, sturdy construction, and user-friendly features, these vertical band saws are excellent choices for craftsmen seeking quality and reliability in their tools. Whether for a workshop or a professional shop floor, the G6046 and G6047 stand out as strong contenders in the market, combining innovative technology with ease of use.
Top Page Image Contents