Grizzly instruction manual H6143 16 Ga. Finish Nailer

Page 5

Operating this nailer can propel objects into the air, causing imme- diate eye damage. To protect your- self, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment. In addition, this nailer discharges at approximately 85-90 decibels. To protect your hear- ing, always wear ANSI approved ear protection when operating.

Never point this nailer at yourself or another person! Always pay attention to the direction this nailer is pointed. Use this tool with respect and caution to lessen the possibility of operator or bystander injury. Ignoring this warning may result in serious personal injury.

No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect. Failure to do so could result in serious personal injury, damage to equipment or poor work results.

H6143 16 Ga. Finish Nailer

-3-

Image 5
Contents Model H6143 Gauge Finish Nailer Before Operating This Equipment SafetySafety Instructions For Pneumatic Tools Wear Approved Hearing Protection Additional Safety Instructions for Nailers H6143 16 Ga. Finish Nailer Foreword IntroductionMachine Data Contact InfoUnpackingInventory SET UPCompressed Air System Disconnect Nailer from the AIR Supply Safety Nose MechanismOperating OperationsLoading To adjust the depth Adjusting DepthTo clear a jammed nail from the dis- charge area Clearing Jammed NailsReplacing Pistons/O Rings CleaningLubricating Cleaning & LubricationH6143 Parts Breakdown Description H6143 Parts ListSymptom Possible Cause Solution TroubleshootingWarranty and Returns Warranty Card Place Stamp Here