SPECIFICATIONS
Two Pole Induction Motor |
| 3450 RPM |
|
|
|
Power |
| 115V, 60 Hz, 15 Amps |
|
|
|
Air Delivery |
| 4.9 SCFM output @ 40 PSI |
| 3.8 SCFM output @ 90 PSI | |
|
| |
|
|
|
Maximum Pressure |
| 125 PSI |
|
|
|
Duty Cycle |
| 75% |
|
|
|
3.0 Peak HP / 2.0 Running HP |
| |
|
| |
19 Gallon Tank |
| |
|
| |
Oil Lubricated Direct Drive Pump |
| |
|
| |
Cast Iron Cylinder |
| |
|
| |
Thermal Overload Protection for Safety |
| |
High Flow Regulator for Precision Air Flow Control
Tank and Outlet Pressure Gauges
Duty Cycle:
This air compressor pump is capable of running continuously. However, in order to prolong the life of your air compressor, it is recommended that a 50% to 75% average duty cycle be maintained. Duty cycle refers to the percentage of time a compressor can safely run within a given amount of time expressed as a ratio. Example: Oil lubricated compressors are typically rated at a 50% duty cycle, meaning that the compressor motor can run about 50% of the total time it is being used to supply air to a tool. During the ON time, the motor is running to pressurize the tank. During the OFF time, the motor is stopped and the tools are running off on the pressurized air stored in the tank. If your air tools are draining pressure off of the tank too quickly, the compressor motor must run more than 50% of the time the compressor is in use. This can lead to overheating and will significantly shorten the life of the compressor.
1