Troubleshooting:
1.The compressor will not run. Probable cause:
1.No power, or the switch is in the “OFF” position.
2.Motor overheated
3.Tank Pressure at maximum
Solutions:
1.Make sure the compressor is plugged in and the switch is in the “ON position.
2.Allow compressor to cool for
3.Release air from tank
2 .Tank pressure drops when compressor shuts off. Probable cause:
1.Loose drain valve
2.Loose connection at regulator or pressure switch Solutions:
1.Tighten drain valve
2.Check connections for leaks
3.Compressor runs continuously. Probable cause:
1.Excessive water in tank
2.Humidity too high Solutions:
1.Decrease usage or increase size of compressor
2.Check all connections for leaks
4.Excessive starting and stopping.
Probable cause:
1.Excessive water
1.Drain tank through drain valve.
FOR CUSTOMER SERVICE
POUR LE SERVICE APRÉS VENTE
OU DU CONSOMMATEUR
PARA EL SERVICIO PARA EL CONSUMIDOR
ALLTRADE TOOLS LLC
1431 VIA PLATA, LONG BEACH, CA
MADE IN / FABRIQUÉ EN / HECHO EN CHINA
© COPYRIGHT 2003, ALLTRADE TOOLS LLC REV. 1