PR14
AIR RIVETER - 3/32", 1/8", 5/32", 3/16" AND 1/4" CAPACITY
•Includes the following nosepieces: 1/4" (6.4mm), 3/16" (4.8mm), 5/32" (4mm), 1/8" (3.2mm), 3/32" (2.4mm)
•Performs well at any angle
•Gets into
•The ¼" Nose piece is located on the end of the outer cylinder
other related parts.
•Provides quick, quiet and comfortable operation preventing user fatigue
SPECIFICATIONS:
Rivet Capacity: | 1/4" |
Overall Length: | |
Net Weight: | |
Stroke: | 15mm |
Motor: | 1/2hp |
Air Inlet Thread NPT: | 1/4" |
Air Hose I.D. Size: | 3/8" (10mm) |
Avg. Air Consumption: | 2.320 Liter/Stroke |
Air Pressure: |
www.astrotools.com
1 YEAR LIMITED WARRANTY
•Astro Pneumatic Tool Co. warrants our products to the original user against defective material or workmanship for a period of 1 year (except where noted on our price schedule) from the date of 1st use. Astro reserves the right to determine whether the product failed because of defective material, workmanship or other causes and to charge back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products covered under this warranty free of charge. The distributor should direct the original user to return the product (with the exceptions listed below) with the distributor’s name, address, adequate proof of date of purchase or a copy of warranty card, and a short note explaining the problem.
Failures caused by accident, alteration, or misuse are not covered by this warranty.
•Astro Pneumatic Tool Co. or its authorized service representatives must perform all warranty repairs. Any repair to the product by unauthorized service representatives voids this warranty. The rights under this warranty are limited to the original user and may not be transferred to subsequent owners.
•This warranty is in lieu of all other warranties, expressed or implied, including warranties of merchantability and fitness for a particular purpose. Some states do not allow the exclusion of limitations of incidental or consequential damages so the above limitations may not apply to you. All claims must be sent to:
Astro Pneumatic Tool Company
372 Old US Highway 52 South
Mt. Airy, NC 27030
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
Unpacking
When unpacking, check the parts diagram and part number listing on page 5 to make sure all parts are included. If any parts are missing or damage, please call your distributor.
AIR RIVETER - 3/32", 1/8", 5/32", 3/16" AND 1/4" CAPACITY
Page 1