W1681 Buffing Assembly
OPERATIONS
General
This machine will perform many types of operations that are beyond the scope of this manual. Many of these operations can be dangerous or deadly if performed incor- rectly.
The instructions in this section are written with the under- standing that the operator has the necessary knowledge and skills to operate this machine. If at any time you are experiencing difficulties performing any operation, stop using the machine!
If you are an inexperienced operator, we strongly recom- mend that you read books, trade articles, or seek training from an experienced buffer operator before performing any unfamiliar operations. Above all, your safety should come first!
READ and understand this entire instruc- tion manual before using this machine. Serious personal injury may occur if safety and operational information is not understood and followed. DO NOT risk your safety by not reading!
OPERATIONS
Testing
Once assembly is complete and adjustments have been made, the machine is ready for a test run. The purpose of a test run is to identify any unusual noises and vibrations, as well as to confirm the machine is performing as intend- ed.
To test run your buffer setup, do these steps:
1.Turn the machine ON by pressing the START button on the power switch. Be sure to have your finger poised to hit the STOP button if there is a problem.
2.Once the machine is running, listen for any unusual noises. The machine should run smoothly with little or no vibrations.
3.If there are any unusual noises or vibrations, shut the machine OFF immediately. The machine should not be run any further until the problems are corrected.
4.Unplug the machine and investigate the source of the noise or vibration. Do not make any adjustments to the machine while it is plugged in.
5.Repeat Steps
DO NOT investigate problems or adjust the machine while it is running. Wait until the machine is turned OFF, unplugged and all working parts have come to a complete stop before proceeding!
Always wear safety glasses when oper- ating this machine. Failure to comply may result in serious personal injury.