Woodstock owner manual Setup, Unpacking, Model W1780 Inventory Qty

Page 8

Model W1780 11⁄4" Brad Nailer

SETUP

Unpacking

This brad nailer has been carefully packaged for safe transportation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately.

Inventory

The following is a description of the main components shipped with the Model W1780. Lay the components out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the tool or examine the packaging materials carefully. Occasionally we pre-install certain components for safer shipping.

B

A

D

C

E

Model W1780 Inventory		Qty
A.	Brad Nailer	1
B.	Pneumatic Tool Oil	1
C.	Hex Wrench 3mm	1
D.	Hex Wrench 4mm	1
E.	Carrying Case	1

-6-

Image 8

Contents 11⁄4 Brad Nailer Page Safety Safety Instructions for Pneumatic ToolsBefore Operating This Equipment Information about proper operationAlways USE Safety Glasses Additional Safety for Nailers/Staplers Tool Data IntroductionWoodstock Technical Support Typical filter/lubricator/regulator installation order Compressed Air SystemSetup UnpackingInventory Model W1780 Inventory QtySafety Nose Mechanism To check the safety nose mechanism, do these stepsOperations LoadingOperating To load your nailer, do these stepsTo adjust the depth, do these steps Adjusting DepthAdjusting Depth section on this Clearing Jammed Nails Replacing Pistons Rings To replace a piston, do these stepsCleaning & Lubrication CleaningLubricatingW1780 Parts Breakdown W1780 Parts List PART# DescriptionTroubleshooting Page Warranty Registration BOX BELLINGHAM, WA